Setting Character Attributes ([Font]/[Size]/[Width]/[Style]/[Line]/[Align]); Setting Character Attributes By Label; Setting Character Attributes By Each Line - Brother p-touch pt-d600 User Manual

Setting Character Attributes ([Font]/[Size]/[Width]/
[Style]/[Line]/[Align])
You can set character attributes by label or by each line, both before and
after entering text.
 Setting Character Attributes by Label

( ) /
value for the attribute
entry screen.
 Setting Character Attributes by Each Line
1. Using / , move the cursor to the line where you wish to change the
character attribute.
( )
2. Press
NOTE
• ( ) displayed on the left side of the character
attribute that appears when you press
( ) and (
applying the attribute for that specific line
only.
• When different attribute values are set for
each line, the value will be displayed as *****
when you press (
using or
change the setting on this screen and then press (
the text entry screen, the same change will be applied to all lines of
the label.
• When [Size] is set to [Auto], the actual printed font size depends on
the tape width, number of characters and number of input lines. Once
characters reach a minimum size, the selected font will default to a
custom font which is based on the Helsinki style. This allows labels
to print using the smallest text possible on narrow or multi-line labels.
• The 6 point font only prints in Helsinki, no other font type.
• When [Size] is set to [Auto] and all the text is entered in uppercase,
the text is automatically adjusted to print in the largest font size
possible for each tape width. This font size is larger than the largest
font size available in the font settings for each tape width.
Select an attribute

( ) or (
and ( ) to display the attributes.
) indicates that you are now
), select an attribute
, and then press (

Setting Character Attributes ([Font]/[Size]/[Width]/[Style]/[Line]/[Align])


( ) or (

) (
) or (
EDITING A LABEL

) / Set a
) to return to the text
). When you
) to go back to
17