Basic Switch Commands - D-Link DGS-1100-16/ME Reference Manual

The Basic Switch commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
clear screen
create account
delete account
config account
show account
show session
show switch
show config
config jumbo_frame
show jumbo_frame
save
reboot
reset
login
logout
ping
create time_range
delete time_range
show time_range
config telnet
auto_logout
show telnet
config firmware
show firmware
create iproute
delete iproute
config
command_prompt
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameter
[admin | user] <username 15>
<username 15>
<username 15>
current_config
ports <portlist> state [enable | disable]
{force_agree}
[config | system | default] {force_agree}
<ipaddr> {times <value 1-255> | timeout <sec 1-99>}
<string 8> [daily start_time < time hh:mm > end_time<time hh:mm > | weekly
start_weekday <weekday> start_time <time hh:mm > end_weekday <weekday>
end_time <time hh:mm> ]
<string 8>
[2_minutes | 5_minutes | 10_minutes | 15_minutes]
image <1,2> boot_up
information
default <ipaddr>
default
config command_prompt [user_define <string 16> | username | default]

BASIC SWITCH COMMANDS

17
6