Table of Contents
Advertisement
Errored Data Indicator
If errored data is received,
flashes in the character position where the
"
errored data was received.
Key Click
If your pager is equipped with this feature and the pager is in audible alert
mode (
), a "click" is emitted whenever a button is pressed. If the pager is
π
in silent alert mode (
), no "click" is emitted.Memory Full Indicator
∫
Memory Full Indicator
There are two different situations that can produce a memory full condition:
either all 26 personal message slots are occupied; or there is space for
less than 130 characters in memory. When this condition is reached,
displayed on the Status screen. If a new personal message or any
message containing more than 130 characters is received, the oldest
personal message is overwritten. Until this condition is corrected (by
deleting unwanted messages or emptying the Trash), messages will
continue to be overwritten.
Care and Maintenance
The CP1250 pagers are durable, reliable, and will provide years service;
however, they are precision electronic products. Water and moisture,
excessive heat, and extreme shock may damage the pager components
and impair the optical quality of the display. Do not expose your pager to
these conditions. If repair is required, the Motorola Service Organization,
staffed with specially trained technicians, offers repair and maintenance
facilities throughout the world.
You can protect your pager purchase with an optional extended warranty
covering parts and labor. For more information about warranties, please
contact your paging service provider or retailer.
Battery Information
Your Motorola CP1250 pager operates with one AAA-size alkaline battery.
Note: Installing the battery incorrectly could result in resetting the alert
mode and time to their default settings, and all messages could be
deleted.
Missing Fragment Indicators
If a portion of the message has not been received, either the <...> (for
alphanumeric) or _____ (for long numeric) missing fragment indicator is
displayed.
Out of Range
If your pager is equipped with this feature, and if you are outside your
paging coverage area,
pager cannot receive messages.
Cleaning Your Pager
To clean smudges and grime from the exterior of your pager, use a soft,
non-abrasive cloth moistened in a mild soap and water solution. Use a
is
ƒ
second cloth moistened in clean water to wipe the surface clean. Do not
immerse in water. Do not use alcohol or other cleaning solutions.
Functionality and Use of Your Pager
For questions pertaining to the functions and use of your Motorola pager
please visit our web site at www.motorola.com/pagers. For questions
pertaining to your paging service, contact your paging service provider.
44
43
Replacing the Battery
Turn the pager off and place the pager
with the display side down as shown.
Unlock the battery door by sliding
the door lock away from the
battery door.
Slide the battery door in the
direction of the arrow indication on
the battery door.
Lift the battery door away from the housing to remove it.
Lift the battery out of the battery compartment, noting the positive (+)
and negative (-) markings on both the battery and the pager housing.
Insert the new battery. Make sure you match the positive and negative
markings on the battery with those on the pager housing.
Align the grooves on the battery door with the grooves on the pager
housing and slide the battery door closed.
Slide the battery door lock toward the bottom of the pager to lock the
battery door.
45
46
ù
is displayed. As long as
ù
is displayed, your
Advertisement
Table of Contents
