The Low-Down On Getting Set Up; Get All Your Gear Together - D-Link PowerLine DHP-P309AV Setup Manual

TO VIEW A VIDEO OF THIS INSTALLATION,
VISIT OPTUS.COM.AU/OPTUSTV/PLCINSTALL
OR CHECK OUT THE FULL USER GUIDE AVAILABLE
AT OPTUS.COM.AU/OPTUSTV/HELP
THE LOW-DOWN ON
GETTING SET UP
The D-Link Powerline Adaptor Kit lets you connect your Optus TV with Fetch Set Top Box to
your broadband internet through the electrical wires in your home. It's an alternative to using
a direct ethernet connection or wireless solution.
And since you are dealing with electricity, there are some things you need to check
before you get going:
• If you are using power boards, refer to the power board notes in Step 1 and Step 2.
• Identify a power point near your modem or router to plug one of the Adaptors into.
• Identify a power point near your Optus TV Set Top Box to plug the other Adaptor into.
• Ensure you have easy access to the power points and existing modem or router for setup.
SAFETY TIP: Turn power points off before you plug in any new devices or unplug any existing devices.

GET ALL YOUR GEAR TOGETHER

THE THINGS YOU'LL USE IN
THE ROOM WITH YOUR MODEM
OR ROUTER
A.
WHITE ADAPTOR
B.
ETHERNET CABLE
2
THE THINGS YOU'LL USE IN
THE ROOM WITH YOUR SET TOP
BOX AND TV
C.
WHITE ADAPTOR
D.
ETHERNET CABLE