Loading And Unloading - Husqvarna HUV4210-G Owner's Manual

The bed latch (1) is located under the front corners of the bed (Figure 16) and engages automatically when the bed is
closed. To lift the bed, pull the bed latch toward the side of the vehicle and lift the bed. To close the bed gently lower
the bed to a closed position. DO NOT drop the bed. See following WARNING.
WARNING
• Keep hands and fingers clear of crush area between the bed and the seat back support.
42
Figure 16 Bed Latch

LOADING AND UNLOADING

WARNING
• Firmly engage the park brake before loading the vehicle.
• Do not allow riders in the cargo bed.
• Do not exceed the rated capacity of the vehicle. Rated capacity is for level surfaces only.
• Overloading can affect vehicle handling or cause component failure, resulting in loss of control
of vehicle and possible severe personal injury.
• Reduce vehicle load and speed when driving up or down slopes or on uneven terrain.
• Reduce speed and avoid sudden stops when backing up. Failure to do so may cause the vehicle
to overturn or flip over backwards.
• Avoid stopping on a hill when loaded. If you must stop on a hill, avoid sudden starts, or rolling
backwards and stopping suddenly. Failure to heed this warning may cause vehicle to overturn,
possibly resulting in severe personal injury.
• Do not load the tailgate. The tailgate should be in the upright position and latched securely while the
vehicle is in motion.
• To help avoid shifting the vehicle load and possibly overturning the vehicle, avoid sudden starts,
sudden stops, and abrupt turns.
WARNING CONTINUED ON NEXT PAGE
1
2009 HUV4210 Owner's Manual
Loading and Unloading
Page 25