Troubleshooting; Troubleshooting Guide; General Operation - Panasonic DMR-XW390 Operating Instructions Manual

Troubleshooting

Troubleshooting guide

Troubleshootin
g
Before requesting service, make the following
checks. If the problem still persists, consult
your dealer for instructions.
Updating to the latest software (firmware) may
solve the problem. (
The following do not indicate a problem with
this unit:
• Regular disc rotating sounds or HDD rotating
sounds.
• Poor reception due to atmospheric conditions.
• Image disturbance during search.
• Interruptions in reception due to periodic
broadcasting breaks.
• When you switch the unit on or to standby
mode, there may be an unexpected sound.
82
VQT4C72
Downloaded from www.Manualslib.com
80)
manuals search engine

General operation

The unit doesn't work.
• Check the connections. (
• One of the unit's safety devices may have been
activated.
Reset the unit as follows:
1 Press [Í/I] on the main unit to switch the unit
to standby.
• If the unit doesn't switch to standby, press
[Í/I] on the main unit for about 3 seconds.
The unit is forcibly switched to standby.
Alternatively, disconnect the AC mains
lead, wait one minute, then reconnect it.
2 Press [Í/I] on the main unit to switch it on. If
the unit still cannot be operated, consult the
dealer.
Cannot eject disc.
The unit may have a problem. While the unit is in
standby mode, press and hold [STOP ∫] and
[CH W] on the main unit at the same time for
about 5 seconds.
13)