Installation - Zanussi ZGF 646 CT User Manual

Installation

The following instructions about
l
installation and maintenance must
be carried out by qualified
personnel in compliance with the
regulation in force.
The appliance must be electrically
l
disconnected
interventions. If any electric supply
to the appliance is required to
carry out the work, ensure all the
necessary
followed.
The side walls of the unit in which
l
the hob is going to be installed,
must not exceed the height of the
working top.
Avoid installing the appliance in
l
the proximity of inflammable
materials (e.g. curtains, tea towels
etc.).
THE MANUFACTURER WILL NOT
ACCEPT LIABILITY, SHOULD ANY
OF THE OTHER
INSTRUCTIONS INCORPORATED IN
THIS BOOKLET
REGULATION
IGNORED.
Gas connection
Choose fixed connections or use a
flexible pipe in stainless steel in
compliance with the regulation in force.
If using flexible metallic pipes, be careful
they do not come in contact with mobi-
le parts or they are not squeezed. Use
the same attention when the hob is
combinated with an oven.
before
precautions
SAFETY
OR THE
IN FORCE
all
are
BE
13