Alignment And Adjustment; Reference; Location Of Adjustment Button Of Remote Control - Sony SLV-LX500 Service Manual

QQ
3 7 63 1515 0

5. ALIGNMENT AND ADJUSTMENT

5-1 REFERENCE

1) X-Point (Tracking center) adjustment and "Head switching adjustment" can be adjusted with remote control.
2) When replacing the Micom (IC601) and NVRAM (IC603 ; EEPROM) be sure to adjust the "Head switching adjustment".
3) When replacing the cylinder ass'y, be sure to adjust the "X-Point" and "Head switching adjustment".
4) How to adjustment.
- Monmently short-circuit the test point on Main PCB with pincers to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.
- If the adjustment is completed, be sure to turn the power off.

5-1-1 Location of adjustment button of remote control

TE
L 13942296513
www
.
http://www.xiaoyu163.com
X-Point (Tracking Center)
Adjustment
Head Switching Adjustment
NVRAM Option Setting
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Q Q
3 6 7 1 3 1 5
co
.
Fig. 5-1
5-1
SLV-LX500/LX600S/LX700S
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9