Reducing Microphone Noise - Panasonic KX-VC1300 User Manual

Reducing Microphone Noise

You can reduce the amount of ambient noise picked up by the microphone (shuffling of papers, etc.) during a
video conference call. When noise reduction is in effect, the volume level of voices may also be reduced.
1 Press [Y].
•
"Whisper Mode [ON]" is displayed, and noise
reduction is enabled.
•
Pressing [Y] again will display "Whisper Mode
[OFF]", and noise reduction is disabled.
Note
•
Noise reduction is available only when Digital
Boundary Microphones are connected.
•
You can set whether to enable noise reduction
for a video conference call before starting the
call (Page 110).
•
After a video conference call is finished, the
noise reduction setting returns to the value set
before starting the call.
•
When ""Y" Button during MCU" in "GUI
Settings" is set to "Discussion /
Presentation", you can switch the MCU mode
by pressing the [Y] button during calls that use
the MCU (Page 135).
Document Version 2015-12
During Video Conference Calls
1
User Manual 77