Miele PW 6321 Operating And Installation Instructions page 34

Frequently asked questions
Water intake fault
M
Call Technical Service
if restart w/o success.
i
^ Check the water supply and press h
"Start".
Door lock fault
/
Contact Technical Service
if restart w/o success.
i
^ Press the door handle so that it closes with
a click, press h "Start".
Heating system fault
§
Program stop.
Press Start.
i
^ Press h "Start" to continue the program
without heating.
If the program has a "Thermostop" the
program will time out.
^ Call Miele Technical Service.
^ Some programs may be canceled if this
messages shows.
Call Technical Service.
34
Drive motor fault
m
Program stop. Press Start.
Motor temperature too high.
f i
^ Allow the motor to cool.
Imbalance fault
§
Call Technical Service
if restart w/o success.
i
f
Large imbalance, the imbalance switch has
activated.
^ Turn the machine off and on again
^ Press h "Start".
Drain valve fault
q
f
Call Technical Service
if restart is w/o success.
i
^ Check and clean the drain system and
press h "Start".
A defective drain valve should only be
replaced by an authorized service
technician.
Dispensing system fault
ö
Fill dispensing container 1
Press Start.
i
^ Change/fill the dispensing container.
Card fault
§
Reinsert card correctly in card reader.
i
^ Insert the card properly into the card
reader.
f
A
f
f
f