Connections; Connecting To A Tv; Connecting To An Audio System - Samsung BD-H4500 User Manual

Connections

Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
- Do not connect the power cord to the wall outlet until you have made all the other
connections.
- When you change the connections, turn off all devices before you start.
NotES
✎
` Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of
your TV.
` When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the
first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
` A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
` To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI cable.
` HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on
the screen.
8
02520A_BD_H4500_ZK ENG.indd 8
Downloaded from www.Manualslib.com

Connecting to a TV

Audio
Video
manuals search engine

Connecting to an Audio System

You can connect the Blu-ray player to an audio system using illustrated below.
- Do not connect the power cord to the wall outlet until you have made all the other
connections.
- When you change the connections, turn off all devices before you start.
Connecting to an HdMI supported AV receiver
• Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your receiver.
• Best quality (Recommended)
Audio
8/13/14 10:50 AM