Motorola CA50 Developer & User Manual page 486

F - 2 CA50/UCA Client & Server Developer & User Guide
When the Rapid Deployment application launches the Scan window displays.
Scan
Waiting...
Options Rese t
Scan Window
Figure F-2
When the Scan window displays Waiting... (as shown in
5.
code and press the Scan key to scan and decode an RD bar code (see
successful decode, a beep sounds and the CA50 LED blinks green. RD bar codes must be scanned in the
appropriate order.
After scanning all the Rapid Deployment bar codes the Processing windows display the status, such as
6.
device registration or network connection.
Processing
This may take a
while...Please Wait
Processing Windows
Figure F-3
The deployment process continues to configure the device. When configuration of the device completes,
7.
the Staging window displays.
Staging
Your Device is Ready to Use
Staging Window
Figure F-4
Press the right soft key (OK) to continue.
8.
When all deployment steps complete, a reboot may be required. If the device requires a reboot, the Reboot
Alert window displays before the device boots.
RD
Device will
reboot in
3 seconds
Reboot Alert Window
Figure F-5
NOTE If the device required a reboot, processing on the device starts at the point it left off prior to the reboot.
When configuration is complete:
• The device has a valid network configuration and the CA50 is on the RF network.
• The UCA client application is ready to communicate with a UCA server.
The settings are persistent.
•
• The device is ready for use.
Processing
Registering Device
Cancel
OK
Figure F-2), aim the laser at the appropriate bar
Scanning on page
Processing
Connecting:
123.123.12.23 [2]
Cancel
4-16). Upon a