Installing The Cylinder Head Covers - Yamaha XV17AS(C) Supplementary Service Manual

ROCKER ARMS, PUSH RODS AND VALVE LIFTERS
c. Install the rocker arm base bolts.
NOTE:
Tighten the rocker arm base bolts in stages
and in a crisscross pattern.
Rocker arm base bolt 1, 2
10 Nm (1.0 m · kg, 7.2 ft · lb)
Rocker arm base bolt 3
24 Nm (2.4 m · kg, 17 ft · lb)
Bolts 1: M6,
Bolts 2: M6,
Bolts 3: M8,
L LLL L LLL L L LLL L
INSTALLING THE CYLINDER HEAD
COVERS
The following procedure applies to both cylin-
ders.
1. Install:
• dowel pins 1
• cylinder head cover gasket 2
2. Install:
• cylinder head cover 1
Bolts 2: = 40 mm (1.57 in)
Bolts 3: = 50 mm (1.97 in)
Bolts 4: = 60 mm (2.36 in)
*: Apply Quick Gasket
– 58 –
ENG
= 40 mm (1.57 in)
= 30 mm (1.18 in)
= 70 mm (2.76 in)
L LLL L L LLL L L LLL L
New
10 Nm (1.0 m · kg, 7.2 ft · lb)
®
to the thread.
LLL