Motorola i736 User Manual
  1. Manuals
  2. Brands
  3. Motorola Manuals
  4. Cell Phone
  5. i736
  6. User manual
Motorola i736 User Manual

Motorola i736 User Manual

Nextel phone
Hide thumbs Also See for i736:
Table of Contents

Advertisement

Quick Links

Download this manual
Nextel i736 Phone
User's Guide
@NNTN5466A@
NNTN5466A

Advertisement

Table of Contents
loading

Related Manuals for Motorola i736

Summary of Contents for Motorola i736

  • Page 1 Nextel i736 Phone User’s Guide @NNTN5466A@ NNTN5466A...

  • Page 3: Table Of Contents

    Contents Getting Started... 1 Removing the Battery Door ... 3 Locating Your SIM Card ... 3 Battery ... 4 Powering On and Off ... 6 Activating Service ... 7 Enabling Over-the-Air Security ... 7 Finding Your Phone Number ... 7 Completing Setup ...
  • Page 4 Editing Entries... 41 Deleting Entries ... 41 Checking Capacity ... 41 Creating Pauses and Waits ... 41 International Numbers ... 42 Memo ... 43 ® Nextel Voice Mail ... 45 Setting Up Your Voice Mail Box... 45 Playing Messages... 45 Changing Your Password ...
  • Page 5 Deleting Custom Ring Tones ... 67 GPS Enabled ... 69 IMPORTANT: Things to Keep in Mind ... 69 Making an Emergency Call ... 70 Viewing Your Approximate Location ... 71 Enhancing GPS Performance... 72 Updating Satellite Almanac Data ... 74 Setting Privacy Options ...
  • Page 6 Portable Radio Product Operation and EME Exposure... 133 Electro Magnetic Interference/Compatibility 136 Medical Devices ... 136 Operational Warnings ... 137 Operational Cautions ... 138 Accessory Safety Information ... 139 MOTOROLA LIMITED WARRANTY... 141 Patent and Trademark Information... 145 Index... 147...
  • Page 7 DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920 Hereby declares that the product: Product Name: i736 Model Number: H63XAN6RR4AN Conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a),...

  • Page 9: Getting Started

    Getting Started volume controls PUSH TO TALK (PTT ) button audio jack accessory connector antenna earpiece one-line display back key speaker (in back) light sensor full-sized display navigation power button space key microphone...
  • Page 10 Acts like e when the flip is closed; accesses recent calls; sends incoming calls to voice mail. To start using your i736 phone: • Make sure your SIM card is in place. • Charge the battery. • Activate your service.

  • Page 11: Removing The Battery Door

    Removing the Battery Door 1 Make sure the phone is powered off. See “Powering On and Off” on page 6. 2 Slide the release button back until it releases the battery door. 3 Allow the battery door to pop up, slide it forward, and remove it from the back of your phone.

  • Page 12: Battery

    Getting Started Battery Inserting the Battery Your phone comes with a Standard Lithium Ion Battery. 1 With the phone powered off, remove the battery door. 2 Insert the top of the battery into the battery area. Press the bottom of the battery to secure it. 3 Replace the battery door and press it gently until you hear a click.
  • Page 13 3 Plug the other end of the charger into the accessory connector. Charger Attached appears on the full-sized display. Tip: To remove the charger from the accessory connector: Press the buttons on the sides of the plug. Pull the plug straight out. 4 If you have purchased optional batteries or chargers, see “Charging Times”.

  • Page 14: Powering On And Off

    2 Remove the battery by pushing the battery toward the antenna and lifting it out. Battery Use and Maintenance • The Motorola iDEN Approved Lithium Ion chargers provide optimum performance. Other chargers may not fully charge the iDEN Lithium Ion battery or may yield a reduced number of lifetime charge cycles.

  • Page 15: Activating Service

    3 Press e to return to the idle screen. Within 24 hours of enabling security, you will receive a Net alert containing your Personal Telephone Number (PTN), Nextel Customer Care number, Direct Connect number, and Talkgroup lists for Group Connect calls.

  • Page 16: Completing Setup

    Getting Started 3 Press O. 4 Scroll to see your information: • Name — Enter your name. See “Entering Text” on page 33. • Line 1 and Line 2 — your phone numbers for phone lines 1 and 2. These are filled in when you receive your first Net alert after enabling over-the-air security on your phone.

  • Page 17: Nextel Worldwide Service

    Setting Up More Talkgroups You can set up more Talkgroups in three ways: • Using Group Connect Management on MyNextel at www.nextel.com • Contacting your Nextel Sales Representative at the time of activation • Using Wireless Manager to create, manage, and delete Talkgroups When you create your Talkgroups, you can select your own Talkgroup numbers.

  • Page 18: Phone Basics

    Getting Started Phone Basics Any time your phone is powered on, the display provides you with information and options. The one-line display shows a shortened version of the full-sized display. To see more information, open the phone cover. The screen shown above is the idle screen. The idle screen appears when your phone is on, but not engaged in any activity.

  • Page 19: Main Menu

    Quick Access to Main Menu Items Each arrow in the navigation key and O can be used to access a main menu item from the idle screen. Each of these keys is assigned to a main menu item when your receive your phone. To assign different main menu items, see “Personalize Features”...
  • Page 20 Getting Started My Info View personal phone information, including phone number and Direct Connect number. See page 7. n Downloads Provides a catalog of ring tones, wallpaper, games and applications that you can download directly from your phone. Browse through the catalog to add a new ring tone, a wallpaper to serve as the background image on your...

  • Page 21: Status Icons

    Profiles Groups of settings you new profile form apply together. See list of profiles page 111. Profiles menu Call Alert Lists call alerts. See list of call alerts page 29. Call Alerts menu VoiceRecord Record and play audio messages. See page 81. Status Icons Status icons appear at the top of the display.

  • Page 22: Sim Card Security

    Getting Started Internet — You are ready to browse the internet or are browsing the internet using a secure connection. Airplane Mode — Your phone is set to Airplane Mode. See “Temporarily Turning Off Calls” on page 105. Packet Data — You are ready to transfer packet data or are transferring packet data.

  • Page 23: Entering The Pin

    4 Press A under Ok. Entering the PIN 1 When the Enter SIM PIN Code screen appears after you power on your phone, enter your SIM PIN. 2 Press A under Ok. The message SIM Unlocked displays. Important: If you enter your PIN incorrectly 3 times, your SIM card is blocked.
  • Page 24 Note: In some cases, Contacts may not be accessible if you move your SIM card to another phone. Contacts entries created with your i736 phone are not readable by an older iDEN SIM-based phone. Inserting Your SIM Card 1 With your phone powered off, remove the battery door and battery.

  • Page 25: Locking The Keypad

    Removing Your SIM Card Important: To avoid loss or damage, do not remove your SIM card from your phone unless absolutely necessary. 1 With your phone powered off, remove the battery door and battery. 2 While holding the tab down, slide your SIM card out of the SIM card holder.

  • Page 26: Accessories

    Your phone comes with a Standard Lithium Ion Battery, rapid travel charger, and holster. Various accessories are available for use with your i736 phone, including cases, vehicle battery charger, batteries, Hands-Free accessories and more. To order additional accessories, go to www.nextel.com or call 1-800-Nextel6.
  • Page 27 Phone Menu Tree Nascar My Info Java Apps Name Java Applications (if any) Line 1 Deinstall Line 2 Permissions Direct Connect License Info Group ID Java System Carrier IP Reset System IP1 Address Delete All IP2 Address Settings Service Status...

  • Page 29: Making Calls

    Making Calls Your i736 phone makes two types of calls: digital cellular phone calls and Direct Connect calls. With Direct Connect calls, you use your phone as a long-range, digital walkie-talkie. Phone Calls With the Flip Open 1 Enter the number you want to call.

  • Page 30: Receiving Calls

    Making Calls When you place a Direct Connect call, you must enter the whole Direct Connect number including the asterisks. Tip: When you store a Direct Connect number in Contacts it is good practice to include the whole Direct Connect number including the asterisks in case you travel with your phone, or another Direct Connect user whom you are trying to reach travels with their phone,...

  • Page 31: Ways To Enter A Number

    Ways to Enter a Number • Use the numbers on the keypad • Select the number from the recent calls list • Select the number from Contacts • Select a number stored in Datebook • Redial the last phone number called •...

  • Page 32: Redialing The Last Number

    Making Calls If you are making a Direct Connect call, your phone places the call to the Direct Connect number stored in the Contacts entry, even if the Direct Connect icon is not displayed. If you are making a phone call: •...

  • Page 33: Missed Phone Calls

    Using Speed Dial and Turbo Dial Each phone number stored in Contacts is assigned a Speed Dial number which you can use to call that number. Speed Dial 1 From the idle screen, use the keypad to enter the Speed Dial number assigned to the phone number you want to call.

  • Page 34: Using Mute

    Making Calls With the Flip Closed When you make a call with the flip closed, speakerphone is always on. Opening the flip turns speakerphone off. Using Mute Muting calls lets you listen to incoming sound without transmitting sound. Mute is available whenever you are on an active call.
  • Page 35 Making Emergency Phone Calls Important: If you are bringing your phone number to Nextel from your previous carrier, you may receive a temporary telephone number while your Nextel phone is being programmed with your permanent phone number. If you make a call to 911 and the...

  • Page 37: Call Alerts

    Call Alerts Sending a call alert lets the recipient know you want to talk to him or her on a Direct Connect call. When you send a call alert, the recipient’s phone emits a series of beeps and displays your name or Direct Connect number.
  • Page 38 Call Alerts Viewing Call Alerts 1 From the main menu, select Call Alert. 2 Scroll through the list. Viewing Date and Time To view the date and time a call alert was received: 1 From the main menu, select Call Alert. 2 Select the call alert you want information on.

  • Page 39: Recent Calls

    Recent Calls The recent calls list stores the numbers of the 20 most recent calls you have made and received. If the number of a recent call is stored in Contacts, the name associated with the number appears on the recent calls list. An icon appears beside the name or number indicating the Contacts type of the number used in the call.

  • Page 40: Deleting Recent Calls

    Recent Calls 2 Press A under Store. -or- If Store is not one of your options: Press m. Select Store. Tip: If Store is not on this menu, the number is already stored in Contacts. 3 To store the number as a new entry, select [New Contact].

  • Page 41: Entering Text

    Entering Text You can enter text into your phone using the traditional method of pressing a key several times for each character, or by pressing a key once for each letter while words likely to be the one you want are chosen from a database.

  • Page 42: Special Function Keys

    Entering Text The displayed word may change as you type it. Do not try to correct the word as you go. Type to the end of the word before editing. 3 If the word that appears is not the desired word, press 0 to change the word on the display to the next most likely word in the database.

  • Page 43: Using Numeric Mode

    Punctuation Press 1 or 0 to insert punctuation. Continue to press the key to view the list of symbols available through that key. Pause to select the symbol you want. Note: Additional punctuation symbols are available in Symbols mode. Using Numeric Mode 1 Select Numeric as your text input mode.

  • Page 45: Contacts

    Contacts Contacts stores up to 600 numbers or addresses. Each Contacts entry can store several numbers or addresses. Information stored in Contacts is saved on your SIM card. A Contacts entry contains: • A name — A name is required if your are storing more than one number or address to the entry;...

  • Page 46: Viewing Contacts

    Contacts Note: You can store numbers up to 64 digits long, but every 20 digits must be separated by a pause or wait. See “Creating Pauses and Waits” on page 41. • A Speed Dial number — When you store a phone number, it is assigned a Speed Dial number.

  • Page 47: Creating Entries

    To set Contacts to show all entries: 1 From the Contacts list, press m. 2 Select Filter. 3 Set this option to Show All. Creating Entries A number or address and a Contacts type are required for all Contacts entries. Other information is optional.

  • Page 48: Storing Numbers Faster

    Contacts Scroll past the information you already entered. Enter the additional information for the entry using step 2 through step 6. You must assign a name to the entry, if you have not already. 8 Press A under Done. Assigning Options 1 If you have not already, select [Options].

  • Page 49: Editing Entries

    Editing Entries 1 From the Contacts list, scroll to the entry you want to edit. 2 Press A under Edit. -or- If Edit is not one of your options: Press m. Select Edit. The entry details screen displays. 3 Follow the applicable instructions in “Creating Entries”...

  • Page 50: International Numbers

    Contacts If you store 17035551235P1234, when you select this number and make a call, your phone dials the first 11 digits, pauses for 3 seconds, then dials the last 4 digits. If you want a pause longer than 3 seconds, press and hold * more than once.

  • Page 51: Memo

    Memo Memo lets you store a number, make a call to that number, and save it to Contacts. To create a memo: 1 From the main menu, select Memo. 2 Enter the number using your keypad. 3 Press O. To view the memo later: 1 From the main menu, select Memo.

  • Page 53: Nextel Voice Mail

    “Thank you for using Nextel Voice Mail,” your mailbox is set up. If you are calling from a phone other than your i736, dial your 10-digit Nextel PTN. When you hear the greeting, press the star key to access your voice mail box.

  • Page 54: Changing Your Password

    Nextel ® Voice Mail • Reply to a message — press 8. • Save the message — press 9. • Skip to the next message — press #. Messages that are not saved or deleted remain in your mailbox as new messages. All messages are automatically deleted after 30 days.

  • Page 55: Advanced Voice Mail Features

    • Press # to skip the greeting and record a message immediately. To record or alter your greeting at any time: 1 From the main voice mail menu, press 3 to change your greeting. 2 Press 1 to play, press 2 to record or re-record, or press 7 to delete your active greeting.

  • Page 56: Automatic Playback

    Nextel ® Voice Mail Greeting 2 Weekday 8:00 am – 11:59 am Mornings Monday – Friday Greeting 3 Weekday Noon – 4:59 pm Afternoons Monday – Friday To activate the greeting schedule: 1 From the main voice mail menu, press 3 to access the greetings menu.
  • Page 57 2 Record your message and press # to end the message. 3 Press 9 at the prompt to indicate that you want to send the message or press 5 for delivery options. 4 Enter the mailbox number and/or group list number(s).

  • Page 58: Working With Group Lists

    Nextel ® Voice Mail 3 The list of options will be presented again. Select an additional option or press 9 to send the message. 4 Enter the destination mailbox or group list number of the recipient(s). 5 Press # to send. 6 Press ** to return to the main menu.

  • Page 59: Message Forwarding

    Message Forwarding Note: You can only forward messages to Nextel customers in your home market. This feature allows you to program your phone to automatically forward incoming messages to another mailbox. There are two types of forwarding: notified and silent. Notified forwarding prompts the caller that the message will be forwarded.

  • Page 61: Messages

    Messages To access your voice mail messages, text and numeric messages, Net alerts, and any other types of messages you are able to receive, go to the message center: 1 From the main menu, select Messages. 2 Select the type of message you want to access. The message center shows how many messages you have of each type.

  • Page 62: Voice Mail

    Messages Voice Mail When you receive a voice mail message, New Voice Mail Message appears on the display. Press A under Call. To dismiss the message notification: If the flip is closed, press .. -or- If the flip is open, press O or press A under Back, or close the flip.

  • Page 63: Net Alerts

    A under Delete. Net Alerts Net alerts are notifications that you have a text and numeric messages sent from: • An i736 phone • www.nextel.com • Any email application Note: Your phone's SMS address is your PTN@page.nextel.com. Your phone's Two-Way Messaging address is your PTN@messaging.nextel.com.

  • Page 65: Call Forwarding

    Call Forwarding Call forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently. Forwarding All Calls When you set your phone to forward all calls, an icon appears in the top row of the display:...

  • Page 66: Forwarding Missed Calls

    Call Forwarding All your calls are now sent to your phone. Calls you miss are forwarded according to the options set for missed calls. By default, missed calls are forwarded to voice mail. Forwarding Missed Calls You can specify a forwarding number for each type of missed call: •...

  • Page 67: Java Applications

    Java Applications Your phone arrives with Java applications installed and ready to run. You can download and install more Java applications. To download and install more Java applications, go to www.nextel.com/idenupdate. You can also check the Downloads menu option on your phone for a catalog of additional items available for purchase and download.

  • Page 68: Ending Applications

    Java Applications Ending Applications To end an application: 1 From the main menu, select Java Apps. 2 If the application you want to end is part of a suite of applications, select the suite. 3 Scroll to the application you want to end. 4 Press A under End.

  • Page 69: Managing Memory

    6 When your phone has finished deleting the application, press A under Done. To delete all Java applications: 1 From the main menu, select Java Apps. 2 Scroll to Java System. 3 Press m. 4 Select Delete All. 5 Press O or press A under Yes to confirm. Managing Memory To view the amount of memory available for Java applications:...

  • Page 70: Java Applications And Gps Enabled

    Java Applications 2 Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it. 3 Scroll to the application you want to remove the shortcut for. 4 Press O. 5 Press A under Done.
  • Page 71 When a Java application requests access to the location of your phone, a screen appears informing you. To deny this request: 1 Press A under Deny. The application does not access the location of your phone. 2 Select the denying option you want: •...
  • Page 72 Java Applications • Ask — When the application requests access to the location of your phone, you are prompted to grant or deny permission (see “Granting or Denying Permission” on page 62). • Never — When the application requests access to the location of your phone, the request is denied without notifying you.

  • Page 73: Ring Tones

    Ring Tones To set the ring tone your phone makes when you receive phone calls, message notifications, or call alerts: 1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off. 3 Scroll through the list of ring tones and select the one you want to assign.

  • Page 74: Assigning Ring Tones To Contacts

    Ring Tones Assigning Ring Tones to Contacts You can set the ring tone your phone makes when you receive phone calls or call alerts from someone you have stored in Contacts. 1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off. 3 Scroll through the list of ring tones and select the one you want to assign.

  • Page 75: Managing Memory

    Managing Memory To view the amount of memory available for custom ring tones: 1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off. 3 Highlight any ring tone. 4 Press m. 5 Select Memory Usage. Deleting custom ring tones frees memory.

  • Page 77: Gps Enabled

    GPS Enabled Your phone’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature.

  • Page 78: Making An Emergency Call

    GPS Enabled • When your GPS antenna is covered (for example, by your hand or other object) or facing the ground • In temperature extremes outside the operating limits of your phone Walking or driving very slowly may also substantially reduce GPS performance. Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may...

  • Page 79: Viewing Your Approximate Location

    GPS satellite signals and network assist data, it may take 30 seconds or more to determine the approximate location. This time will increase where there is reduced access to satellite signals. When your approximate location is determined, it is made available to the appropriate emergency response center.

  • Page 80: Enhancing Gps Performance

    GPS Enabled • The number of satellites used to calculate the location. In general, more satellites make for better accuracy. To calculate your location again: Press A under Rfrsh. It may take your phone several minutes to complete the process of determining your location. During this time, a message usually appears on your phone’s display saying your phone is scanning for satellites.
  • Page 81 To improve accuracy and increase your chances of a successful calculation, do the following while your phone is determining your approximate location: • Stay in the open. The GPS feature works best where there is nothing between your phone and a large amount of open sky.

  • Page 82: Updating Satellite Almanac Data

    GPS Enabled • Stand still. If possible, stand still until your phone is finished determining your location. Moving your phone at a walking pace while your phone is calculating your approximate location may substantially decrease GPS performance. • In a car. When using the GPS Enabled feature in a car, position your phone so that the GPS antenna has good access to GPS signals through the car’s windows.

  • Page 83: Setting Privacy Options

    Setting Privacy Options Your phone’s GPS privacy options control whether Java applications on your phone or other software applications may view the location of your phone.You may set your phone to one of these GPS privacy options. Note: Privacy options do not apply to the transmission of location information during emergency 911 calls.

  • Page 84: Using Gps With Map Software

    GPS Enabled To change your GPS PIN: 1 From the main menu, select Settings > Security > Change Password > GPS PIN. 2 Enter the current GPS PIN. Note: When you receive your phone, your GPS PIN is 0000. 3 Press A under Ok. 4 Enter the new 4- to 8-digit GPS PIN.
  • Page 85 Getting Started To connect your phone to your laptop or other device: 1 Open the connector cover. connector cover Using GPS with Map Software 2 With the phone’s display facing up, insert the data cable’s connector into the accessory connector, until you hear a click.
  • Page 86 GPS Enabled • Stop bits: 1 • Flow control: Hardware To set your phone to send location information to your laptop or other device: 1 From the main menu, select GPS > Interface. 2 Set NMEA OUT to On. Your phone is now sending location data to your laptop or other device.

  • Page 87: Nextel Online Services

    Subscribe to NASCAR alerts and learn about new NASCAR wireless content, downloadablegames,ringtones,and wallpaper. To access this NASCAR wireless information, select NASCAR from the main menu of your i736 phone. Accessing NOL Services From Your Phone You must first enable security on your phone to receive NOL services.

  • Page 88: Navigation Keys

    Nextel Online ® Services Your NOL home page displays. 2 Choose the service you want to access. To access your Two-Way Messaging Service: Select the Text Messaging application from the Net menu. To access the Web: Select Web Sites, Marketplace, or Search To access Address Book: Select Business Tools >...

  • Page 89: Voice Records

    Voice Records A voice record is a recording you make with your phone and can play back. You can record notes to yourself or phone calls. Your phone can store up to 20 voice records. Creating Voice Records To record a note to yourself: 1 From the main menu, select VoiceRecord >...

  • Page 90: Deleting Voice Records

    Voice Records 5 Press O. Deleting Voice Records To delete a voice record: 1 From the main menu, select VoiceRecord. 2 Scroll to the unlocked voice record you want to delete. 3 Press m. 4 Select Delete. 5 Press O or A under Yes to confirm. To delete all voice records: 1 From the main menu, select VoiceRecord.

  • Page 91: Advanced Calling Features

    Advanced Calling Features Call Waiting Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call. If you are on a call and receive a second call, your phone emits a tone and displays a message saying you are receiving a second call.

  • Page 92: Putting A Call On Hold

    Advanced Calling Features Putting a Call on Hold 1 While on an active call, press m. 2 Select Hold. If you want to make the call active again, press A under Resume. Calling 2 People Putting a Call on Hold, Making a Second Call 1 Place or receive a phone call.

  • Page 93: Creating Pauses And Waits While Dialing

    Creating Pauses and Waits While Dialing You can enter a pause or wait while dialing a number. For more information on pauses and waits, see “Creating Pauses and Waits” on page 41. To create a pause while dialing a phone number: 1 From the keypad, enter the digits you want to occur before the pause.

  • Page 94: Setting Flip Actions

    Advanced Calling Features To set your phone to call a Direct Connect number you choose: 1 From the main menu, select Settings > DC/GC Options > One Touch DC > Assigned Number. 2 To enter the Direct Connect number you want your phone to call every time you press the PTT button: Enter the number using your keypad.

  • Page 95: Group Connect Calls

    Group Connect Calls A Group Connect call is a call made to all members of a Talkgroup at once. A Talkgroup is a predetermined group of up to 25 Nextel customers. Before you can make or receive Group Connect calls, a Talkgroup must be established. After the Talkgroup is established, you must join the Talkgroup.

  • Page 96: Using Your Phone As A Modem

    Advanced Calling Features • DC/GC Lifetime — displays the total minutes of all your Direct Connect and Group Connect calls. • Circuit Reset — keeps a running total of all of your circuit data use, until you reset it. • Circuit Lifetime — displays the total minutes of all of your circuit data use.

  • Page 97: Making Tty Calls

    Wireless Data Services software (available separately) and subscribe to a Nextel Wireless Web access plan. For more information on setting up your computer and your i736 phone for packet and circuit data calls, refer to the Nextel Online Guide on www.nextel.com.
  • Page 98 Advanced Calling Features TTY device features such as Turbo-Code, High-Speed, and Interruption are not supported by your phone. These features must be turned off or disabled to use your TTY device with your phone. Turning On the TTY Feature Your phone’s TTY feature must be on if you want to make TTY calls, set the TTY mode, or change the TTY baud rate.

  • Page 99: Special Dialing Codes

    To change the TTY baud rate: 1 From the main menu, select Settings > Phone Calls > TTY > Baud. 2 Select the baud rate for your location. Special Dialing Codes Non-Emergency Numbers Nextel supports many “non-emergency” numbers (such as #77, 311,...) provided by local and state governments.

  • Page 100: Call Restrictions

    Advanced Calling Features Per-Line Blocking You can permanently block delivery of your phone number on every call you make. To disable on a per-call basis: Press * 8 2 before dialing the call. Alternate Line Service You can have two different phone numbers on the same handset.

  • Page 101: Datebook

    Datebook Datebook stores up to 250 events. You can store events over a 13 month period — 12 months after and 1 month before the current date. A Datebook event contains: • A subject — A name you assign to the event. You can also enter a phone number, Direct Connect number, or Talkgroup number here.

  • Page 102: Creating Events

    Datebook To view an event: 1 Select the day the event occurs. 2 Select the event. To change the current view: 1 While viewing Datebook, press m. 2 Select the view you want. Note: Day view is the default setting. Navigating Datebook To scroll through Datebook: Scroll left and right using the navigation key.
  • Page 103 Enter a phone number, Direct Connect number, or Talkgroup number. After the event is stored, you can call this number. When you are finished, press O. 3 If you want to assign a location to the event: Select Location. Enter the location. See “Entering Text” on page 33.

  • Page 104: Editing Events

    Datebook If you want to assign a ring tone, a profile, or a Java application to the event, see “Assigning More Options”. Assigning More Options To assign more options before storing an event: 1 If you have created a reminder for the event and want to set the ring tone for that reminder: Select Ring Tone.

  • Page 105: Deleting Events

    Deleting Events 1 Select the day the event occurs. 2 Select the event. 3 Press m. 4 Select Delete. 5 If the event is not a recurring event, press O or press A under Yes to confirm. -or- If the event is a recurring event: Select This Event Only to delete only the event selected in step 2.

  • Page 106: Making Calls From Datebook

    Datebook Making Calls From Datebook If you stored a phone number, Direct Connect number, or Talkgroup number in the Subject or Location field of a Datebook event, you can call or send a call alert to that number from Datebook. You can call the number stored in Subject and the number stored in Location if one is a phone number and the other is a Direct Connect number or...
  • Page 107 • Time Shift — lets you shift the times of all Datebook events. This is useful if you are traveling to a different time zone. • Alert Timeout — sets the amount of time a tone continues to sound when you receive a message notification, call alert, or Datebook reminder.

  • Page 109: Shortcuts

    Shortcuts Shortcuts lets you access most menu options by pressing a number on your keypad or saying the voice name of the shortcut. You create the shortcut and then use it to take you to that screen any time. Creating a Shortcut 1 Go to the menu item you want to create a shortcut for.

  • Page 110: Deleting Shortcuts

    Shortcuts 6 Scroll to the place where you want the shortcut to appear. 7 Press A under Insert. 8 Repeat step 4 through step 7 for all the items you want to move. 9 Press A under Done. To change the number or voice name assigned to a shortcut: 1 From the main menu, select Shortcuts.

  • Page 111: Customizing Your Phone

    Customizing Your Phone Setting the Volume Of the Earpiece and Speaker 1 From the main menu, select Settings > Volume. 2 Scroll to Earpiece to set the earpiece volume. -or- Scroll to Speaker to set the speaker volume. 3 To set the volume: Scroll left or right.

  • Page 112: Changing The Look Of Your Phone

    Customizing Your Phone Note: If you are using your phone with a headset, and you have the Flip to End option set to On, closing your flip sends incoming sound to the headset and does not end the call. See “Setting Flip Actions” on page 86. Using a Remote PTT Button If you are using a headset or other accessory with a remote PTT button, you can use the remote PTT...

  • Page 113: Temporarily Turning Off Calls

    To set the contrast of the one-line display, select Ext. Display. 3 Scroll left or right to set the contrast. Setting the Menu View You can set the items on your main menu and Java applications menu to appear as large icons or a list: 1 From the main menu, select Settings >...
  • Page 114 Customizing Your Phone • Clock — controls whether the time and date appear on the idle screen; sets time and date format; sets year. • Menu View — controls whether the items on your main menu and Java applications menu appear as large icons or a list.
  • Page 115 • Tkgrp Area — lets you define your Talkgroup area. • One Touch DC — See “Setting One Touch Direct Connect” on page 85. • Alert Type — controls how your phone notifies you when you receive Direct Connect calls and Group Connect calls.

  • Page 116: Advanced Features

    Customizing Your Phone • Java Earpiece — sets the volume of sound associated with Java applications coming out of the earpiece. • Java Speaker —sets the volume of sound associated with Java applications coming out of the speakers. • Data — sets the volume of sounds that notify you that you are receiving a circuit data call.
  • Page 117 • Airplane Mode — prevents your phone from making or receiving phone calls, Direct Connect calls, or Group Connect calls, or transferring data. • Phone Only — prevents your phone from making or receiving Direct Connect calls or Group Connect calls, or transferring data. •...

  • Page 119: Profiles

    Profiles A profile is a group of settings saved together so that you can apply them to your phone easily. A profile contains these settings: • Ring Tones — sets all options described in “Ring Tones” on page 65, except assigning ring tones to Contacts.

  • Page 120: Temporary Profiles

    Profiles When you do this, your phone either: • Updates the profile in effect to reflect these changes, without notifying you -or- • Creates a temporary profile that contains these changes To set your phone to create a temporary profile that contains changes you make to settings: 1 From the main menu, select Profiles.

  • Page 121: Creating Profiles

    3 Press m. 4 Select Store Changes. The temporary profile is stored with the name of the profile it is based on. The profile it is based on, as it existed before you made changes to settings, is gone. Creating Profiles 1 From the main menu, select Profiles.

  • Page 122: Setting Call Filtering

    Profiles Setting Call Filtering The call filtering setting in each profile lets you control which calls, call alerts, and message notifications your phone notifies you of, and which it ignores. To set call filtering: 1 While setting options for a profile, select Call Filter.

  • Page 123: Nextel Customer Care

    Customer Care ® There are a number of features available with your Nextel service and your new i736 phone, so you may be overwhlemed at first. Relax! Nextel Customer Care is here to help. If the feature information and instructions in this guide don't...

  • Page 124: Nextel Worldwide Customer Care

    Nextel ® Customer Care Nextel Worldwide ® Customer Care When traveling outside of the U.S. and Canada, call +1 (360) 662-5202 for your Customer Care service needs. This customer care number is toll-free from your Nextel handset. International coverage, rates, and other information is available on www.nextel.com.

  • Page 125: Understanding Status Messages

    Understanding Status Messages You may receive status messages under certain conditions. Before contacting Nextel Customer Care, note the message, numeric code, and the conditions under which it appeared. The following table lists and describes the status messages. Note: When your phone cover is closed, the one-line display screen shows a shortened version of the status messages displayed in the full-sized screen.
  • Page 126 Understanding Status Messages Status Status Message Description Messages Messages (one-line (full-sized display) display) You have attempted to Failed No Dispatch reach a Nextel customer Number Stored using One Touch Direct Connect, but there is no Direct Connect number stored in your recent calls list.
  • Page 127 Status Status Message Description Messages Messages (one-line (full-sized display) display) Auto Phone Lock is Unit Lock Enter Unlock activated. Enter your Code unlock code. Warns of low memory for Low Memory New Browser Net Alerts. Message Memory Full! Searching for GPS Scanning for satellites.

  • Page 129: Nextel Terms And Conditions Of Service

    Nextel Terms and ® Conditions of Service TERMS AND CONDITIONS OF SERVICE: This Agreement starts when you open the inside package of any phone or accessory equipment (“Equipment”), you (“Customer”) received with this Agreement, or when you call to activate Nextel wireless communications services (“Service”), or when you sign this Agreement, whichever applies.
  • Page 130 Nextel ® Terms and Conditions of Service Customer shall be made only in writing to Company at the address shown on Customer’s bill. Company reserves the right not to renew this Agreement at any time prior to the conclusion of the Service Term or any renewal term.
  • Page 131 the cancellation of any orders of Equipment by the manufacturer. Customer, at its option, may have the Equipment installed by Company at the rate specified on the front of this Agreement. If Customer purchases the Equipment on credit or on an installment basis, installations, repairs, and removal of Equipment must be performed by a party authorized by Company.
  • Page 132 Nextel ® Terms and Conditions of Service other Equipment limitation. Only certain internet sites may be accessed, and certain Nextel Online Services may not be available in all Company Service areas. 7. APPLICATION CUSTOMER CARE AND SUPPORT – Customer acknowledges and agrees that in most cases, the developer of an Application is responsible for providing customer care and Application support to all customers using the...
  • Page 133 Agreement unless cancelled earlier by either party with thirty (30) days advance written notice to the other party. Customer acknowledges that chargeable time for telephone calls and Nextel Direct Connect call transmissions originated by a unit begin when a connection is established with...
  • Page 134 (6) seconds after the other party finishes its Nextel Direct Connect transmission. Customer accepts responsibility for Airtime charges from incoming telephone calls to its mobile unit from the time that Customer responds to the call. If Customer disputes any Service charges,...
  • Page 135 discretion at any time or from time to time. If Company obtains the services of a collection or repossession agency or an attorney to assist Company in remedying Customer’s breach of this Agreement, including but not limited to the nonpayment for charges hereunder, Customer shall be liable for this expense.
  • Page 136 Charge. Such Charges include, but are not limited to: excise taxes; sales and transaction taxes; gross receipts taxes, utility taxes; universal service assessments; telephone relay service (TRS) assessments; and other regulatory fees and assessments. Customer shall not be responsible for taxes imposed on Company’s net...
  • Page 137 COMPANY’S SOLE LIABILITY FOR SERVICE DISRUPTION, WHETHER CAUSED BY THE NEGLIGENCE OF THE COMPANY OR OTHERWISE, IS LIMITED TO A CREDIT ALLOWANCE NOT EXCEEDING AN AMOUNT EQUAL TO THE PROPORTIONATE CHARGE TO THE CUSTOMER FOR THE PERIOD OF SERVICE DISRUPTION. EXCEPT AS OTHERWISE SET FORTH IN THE PRECEDING SENTENCE, IN NO EVENT IS THE COMPANY LIABLE FOR ACTUAL, CONSEQUENTIAL, INCIDENTAL, SPECIAL OR...
  • Page 138 911 OR OTHER EMERGENCY CALLS - (a) The Service provided hereunder does not interact with 911 and other emergency services in the same manner as landline telephone service. Depending on Customer’s location and the circumstances and conditions of a particular call, the Service provided hereunder may not be able to identify Customer’s...
  • Page 139 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. CUSTOMER HEREBY WAIVES, AS AGAINST COMPANY, ALL OTHER WARRANTIES, GUARANTEES, CONDITIONS, OR LIABILITIES, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE. IN NO EVENT SHALL COMPANY BE LIABLE FOR CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES, WHETHER OR NOT OCCASIONED BY COMPANY NEGLIGENCE AND INCLUDING, WITHOUT LIMITATION, LIABILITY FOR ANY LOSS OR...
  • Page 140 Nextel ® Terms and Conditions of Service by Company or exercised by Customer. Company shall not be liable to Customer or to any third party for blocking messages sent through Company’s network or systems. 24. CUSTOMER INFORMATION – Company may in its sole discretion access, use, and disclose to third parties, any information (whether personally identifying information, or “Customer proprietary...

  • Page 141: Safety And General Information

    Portable Radio Product Operation and EME Exposure Your Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME): •...

  • Page 142: Phone Operation

    “IN USE”. Holding the antenna affects call quality and may cause the radio product to operate at a higher power level than needed. Approved Accessories For a list of approved Motorola accessories call 1-800-453-0920, or visit our website at www.motorola.com/iden.
  • Page 143 The SAR information reported to the FCC includes the FCC-accepted Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.

  • Page 144: Electro Magnetic Interference/Compatibility

    Safety and General Information Electro Magnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so.

  • Page 145: Operational Warnings

    Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Use While Driving Check the laws and regulations on the use of radio products in the area where you drive.

  • Page 146: Operational Cautions

    Safety and General Information other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. Blasting Caps and Areas To avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio”.

  • Page 147: Accessory Safety Information

    Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners.
  • Page 148 Safety and General Information • The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet. • Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way;...

  • Page 149: Motorola Limited Warranty

    PURCHASED IN THE UNITED STATES OR CANADA What Does this Warranty Cover? Subject to the exclusions contained below, Motorola, Inc. warrants its Motorola iDEN Digital Mobile and Portable Handsets ("Products"), Motorola-branded or certified accessories sold for use with these Products ("Accessories") and...
  • Page 150 (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage. Use of Non-Motorola Products and Accessories.
  • Page 151 Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable. What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty.
  • Page 152 Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted.

  • Page 153: Patent And Trademark Information

    DIRECT CONNECT and NEXTEL WORLDWIDE are service marks, trademarks, and/or registered trademarks owned by Nextel Communications, Inc. MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2003 Motorola, Inc.

  • Page 155: Index

    Index Numerics 3-way calling 84 Accessories 18 safety 139 Alpha mode 33 Backlight 105 Battery care 6 charging 4 door 3 inserting 4 safety 138 Baud rate 109 Call alerts 29 deleting 30 queue 29 receiving 29 responding 29, 30 sending 29 sorting 30 viewing 30...
  • Page 156 Index SIM card 37 storing fast 40 storing from idle screen 40 storing from Memo 40, 43 storing from recent calls 31, type 31, 37 viewing 38 voice name 40 Customer Care 18, 115 Datebook 24 DC/GC Options 106 see also Direct Connect calls, Group Connect calls, and call alerts Dialing codes...
  • Page 157 Keypad 2 locking 17, 108 Language 106 Lists, see menus Memo 43 calling from 43 creating 43 editing 43 storing to Contacts 40, 43 viewing 43 Memory Java applications 61, 82 ring tones 67 voice records 82 Menu key 2, 11 Menus 10 context-sensitive 2, 11 main menu 11...
  • Page 158 Index deleting 67 downloading 66 memory 67 off 65 setting 65 setting in Contacts 39, 66 vibrate 65 viewing assigned 66 Ringer 103 see also Ring tones off 103 Safety 133 accessory 139 battery 138 electromagnetic interference medical devices 136 radio frequency 133 Security 108 Send key 2...
  • Page 159 Voice name 24, 38 creating 40 Voice records 81 creating 81 deleting 82 labelling 81 locking 82 memory 82 playing 81 Volume, setting 103, 107 Waits dialing 85 storing 41 Word mode 33...

Table of Contents