Ipp Client Configuration - Windows 98Se/Me - Motorola WPS870G User Manual

User Guide
IPP Client Configuration – Windows 98SE/ME
To configure the IPP client in Windows 98SE/ME:
Navigate to the program by clicking Start > Programs > IPP Port Monitor >
1
Add IPP Port. The Configure IPP Port window is displayed:
Enter the IP Address or URL of the IPP Server. If using a router with forwarding
2
capabilities, then enter the router's IP address. If you are assigned a public IP address
from your ISP, enter that IP address.
If Internet access from your location is using a Proxy Server, check Access IPP Server
3
via Proxy Server, and enter details of your Proxy Server (this will be the same as your
Browser configuration). For Port Number use 631.
If necessary, click Select Device Port to view the available ports on the WPS870G,
4
and select the appropriate port.
Click Save.
5
PAGE 67
WPS870G