Wall Mount Installation - Motorola WE800G User Manual

Installation
WE800G

Wall Mount Installation

To mount the Wireless Ethernet Bridge on the wall, you must:
! Position the WE800G as specified by the local or national codes
governing residential or business communications services.
! Follow all local standards for installing a network interface
unit/network interface device (NIU/NID).
If possible, mount the Wireless Ethernet Bridge to concrete,
masonry, a wooden stud, or other solid wall material. Use
anchors when necessary; for example, if you must mount the
WE800G on drywall.
To mount your Wireless Ethernet Bridge on the wall:
1 Print the Wall Mounting Template shown on this page:
INPUT VOLTAGE: +5VDC, 2A
FCC ID: F2NWE800G
MODEL: WE800G
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
The illustration is drawn at a one-to-one scale, which means that
when printed, it provides the exact dimensions required to mount
the WE800G. Be sure to measure the printed template with a
ruler to ensure that it is the correct size.
3.15
[80.00]
MODEL WE800G
PART NUMBER: AAAAAA-BBB-CC
S/N: PPPPMMYJJJSSSSSCAABBCCCC
WIRELESS MAC: AB CD EF 01 23 45
MADE IN TAIWAN
Section 2
2-5