Light Switches; Manual Operation - Honda 2016 CR-V Owner's Manual

Light Switches

■

Manual Operation

High Beams
Flashing the high beams
Low Beams
Turns on parking, side marker,
tail, and rear license plate lights
Turns on headlights, parking,
side marker, tail, and rear
license plate lights
Rotating the light switch turns the lights on
and off, regardless of the position of the
ignition switch.
■
High beams
Push the lever forward until you hear a click.
■
Low beams
When in high beams, pull the lever back to
return to low beams.
■
Flashing the high beams
Pull the lever back, and release it.
uuOperating the Switches Around the Steering WheeluLight Switches
1Light Switches
Models without smart entry system
If you remove the key from the ignition switch with
the lights on, a light on reminder chime sounds when
you open the driver's door.
Models with smart entry system
If you leave the power mode in VEHICLE OFF (LOCK)
while the lights are on, a chime sounds when the
driver's door is opened.
All models
Do not leave the lights on when the engine is off
because it will cause the battery to discharge.
Continued 161