Brother DCP-7080 Service Manual page 90

 Error code BF00
Scan Unable
Document is too long for 2-sided scanning. Press Stop key.
The first side document scanning position sensor detected that the ADF was unable to
duplex-feed the document because the document length is 400 mm or longer.
<User Check>
• Set A4 or Letter size paper.
• Remove the jammed document.
Step
First side document scanning
1 position actuator caught in some
sections of the machine
First side document scanning
2
position sensor failure
Main PCB failure
3
 Error code C700
Out of Memory
Press Stop Key.
There is insufficient memory to expand PC print data.
Error code C800
Print Data Full
Print Data is full. Press Stop and delete the previously stored data.
The memory size allotted for Secure print was exceeded when saving Secure print data.
<User Check>
• Print the print data stored in the memory.
• Divide the print data and print them separately.
Step
Main PCB failure
1
 Error code D100
Print Unable D1
Turn the power off and then back on again.
An error occurred while initializing the modem.
Step
Modem PCB failure
1
Main PCB failure
2
Cause
Reattach the first side document scanning
position actuator.
Replace the first side document scanning
position sensor PCB ASSY.
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
Cause
Replace the modem PCB ASSY.
Replace the main PCB ASSY.
2-55
Remedy
Remedy
Remedy
Confidential