Motorola SURFboard SVG2500 Quick Installation Manual page 11

A. Connect the SVG2500 to Your Cable TV System
You can connect your SVG2500 to your cable system either
directly or using a splitter.
Connecting Directly to the Cable Outlet
1. Connect one end of the coaxial cable to the cable TV wall
outlet and connect the other end to the cable connector on
the SVG2500.
2. Connect one end of the DC power cord into the power
connector on the SVG2500 and plug the other end into an
AC wall outlet, surge protector, or UPS. This turns the
SVG2500 on.
If, after a few minutes, the POWER, DS, US, and ONLINE lights on
the front panel light solid green, continue with Section B, C, or
D. Otherwise, contact your Internet service provider and
provide your MAC address.
QUICK INSTALLATION GUIDE 11