Motorola SBV5220 User Manual page 58

Introduction
7
Click Remove Driver. A progress bar indicates that the driver is being removed.
The following window displays when the USB driver has been successfully removed:
8
Click Exit to exit the Motorola USB Driver Removal Utility.
or
You can click Details to display informational messages about the files that were found and deleted, similar to
the ones shown. If necessary, scroll down to view the entire list. Click OK to close the details window:
Re-install the USB driver following one of:
•
"Setting Up a USB Driver in Windows 98 Second Edition"
•
"Setting Up a USB Driver in Windows 2000"
•
"Setting Up a USB Driver in Windows Me"
•
"Setting Up a USB Driver in Windows XP"
If you continue to have problems, contact your cable provider.
SBV5220 VoIP Cable Modem User Guide
Installation Troubleshooting
on page 13
on page 17
on page 20
on page 21
Glossary License
49