Floppy Disk Drive Problems (On Optional Docking Station)8-7; Floppy Disk Drive Problems (On Optional Docking Station) - Motorola L3391 Owner's Manual

The external monitor displays nothing.
l Make sure that the monitor is turned on.
l Make sure that the monitor's signal cable is properly connected.
l Check if the Setup item Display Mode on the Main menu of the SCU
program is configured correctly.
l Switch the display to the monitor by pressing
Windows' Display properties.
Simultaneous display does not work.
l Make sure that you turn on the external monitor before turning on the
computer.
l Check the Setup item Display Mode on the Main menu of the SCU
program is configured correctly.
l Press
Fn F9 or use Windows' Display properties to select the display
+
options.

Floppy Disk Drive Problems (on optional docking station)

The Floppy Disk Drive In-use Indicator stays on.
l Make sure that the floppy disk is not physically damaged.
l Make sure that the floppy disk is inserted correctly.
The disk drive cannot write to a floppy disk.
l Make sure that the floppy disk is formatted.
l Make sure that the floppy disk is not write-protected.
l Make sure that you are writing to the correct drive.
l Make sure that there is enough space left on the floppy disk.
l Make sure that the floppy disk is not physically damaged.
Troubleshooting
Fn F9
+ or through the
8-7