Indicator Lights; Audio Tones; Making Calls; Making Calls Continued - Motorola MOTOSTART H350 Quick Start

MAKING CALLS

Function
Make a voice dial call
End a call
Receive a call
Reject a call
Redial last call
Answer a second
incoming call
Note: Your H350 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.

INDICATOR LIGHTS

The indicator light provides information about
your headset status.
With the Charger Plugged In
Headset Indicator
On (steady)
Off
With No Charger Plugged In
Headset Indicator
Off
On (steady)
10 rapid flashes
Slow pulse
Quick flash
Note: After 5 minutes of inactivity, the light stops flashing to
conserve power, but the headset remains in standby mode.
Action
Tap the Call button
and speak the
name after the tone
Tap the Call button
Tap the Call button
Press and hold the
Call button until you
hear a beep
Press and hold the
Call button until you
hear a beep
Press and hold the
Call button (places
first call on hold)
Headset Status
Charging
Charging complete
Headset Status
Power off
Pairing mode
Pairing successful
Connected
(on a call)
Standby
(not on call)
MAKING CALLS
Function
Toggle between two
active calls
Join a 3-way call
Put an active call on
hold or resume a call
on hold
Transfer a call from the
phone to the headset
Disable or enable the
indicator light
Mute or unmute a call
Note: Some features are phone/network dependent.

AUDIO TONES

The audio tones provide information about your
headset status.
Audio Tone
Single high tone when
pressing volume button
Five rapid high tones
repeated every 60 sec.
No audio indications;
deteriorating quality
Ring tone
Single high tone
Single low tone
Dual high/low tone
Single high tone
Low to high tone
Two ascending tones
Two descending tones
CONTINUED
Action
Press and hold
the Call button
Press and hold
both Volume buttons
Press and hold the
Call button until you
hear a beep
Tap the Call button
Press and hold
both Volume
buttons for 3 to 4
seconds
Tap both Volume
buttons
Headset Status
Volume at minimum
or maximum
Low battery
Out of range
Incoming call
Pairing confirmation
Voice activation
Voice tag not
recognized
End call
Phone network
not available
Mute enabled
Mute disabled