Fan Mode Only - Kenmore 35712 Instructions For Use Manual

Using the remote control unit
TURNING THE APPLIANCE ON
Plug into the mains socket.
Press the ON/STAND-BY button
same mode as when it was turned off).
Press the MODE button (19) to select the required mode:
AIR-CONDITIONING (
DEHUMIDIFYING (
FAN ONLY ( )
An arrow on the display indicates the selected mode.
AIR-CONDITIONING MODE (
Ideal for hot humid weather when you need to cool and dehumidify the room.
In air-conditioning mode, use the
The display shows the set temperature.
To change the fan speed, use the fan button
available speeds:
the appliance automatically selects the most suitable fan speed in relation to the tem-
perature set on the digital display.
the air conditioner operates at maximum to reach the required temperature as rapidly as
possible
reduces noise levels but still maintains a good level of comfort
for silent operation
Two arrows on the display indicate respectively air-conditioning (
The most suitable temperature for the room during the summer varies from 24 to 27°C. You are
recommended, however, not to set a temperature much below the outdoor temperature.
DEHUMIDIFYING MODE (
Ideal to reduce room humidity (spring and autumn, damp rooms, rainy periods, etc).
In dehumidifying mode, the appliance selects fan speed automatically.
Two arrows on the remote control display indicate

FAN MODE ONLY (

In fan mode, fan speed can be set by pressing the fan button
The fan speed changes between the speeds available (LOW/MED/HIGH).
Two arrows on the display indicate the fan mode and the speed set.
In this mode, the auto speed cannot be selected.
SETTING THE TIMER
The timer can be used to delay appliance start up or shutdown. This avoids wasting electricity by
optimising operating periods.
How to programme delayed shutdown
• With the air-conditioning unit on, press the timer button (
"h" symbol flashes, with a flashing arrow indicating "timer off" (
• Set the time when you want the appliance to go off using the
24 hours). During the first ten hours, you can select half hour intervals. For times greater than
ten hours, one hour intervals can be selected.
(18) (when turned on, the air conditioner starts operating in the
)
)
)
buttons to select the desired temperature.
)
)
(17) on the remote control, choosing from the
) and the fan speed.
and respectively.
(17).
) 20. The time is displayed and the
).
buttons (from 30 minutes to
11