Placing And Ending Calls - Motorola StarTAc 7760 Owner's Manual

Tip:
If you press
æ
without
entering a
number, your
phone will dial
the last number
entered.
28

Placing and Ending Calls

Placing a Call
1. Extend Extend the antenna completely for best
performance.
Antenna
2. Open Open the phone to expose the keypad. If neces-
sary, press
Phone
3. Enter Enter the number you want to call,
for example: 555-1212.
Number
Correct Press
make a mistake. Press & hold
Errors
entire entry and start again.
4. Place Press
or
Call
Press & hold
You will see: Calling 555-1212 .
You can dial phone numbers with up to 32 digits, but only the
last twenty-four digits will appear in the display.
Press
Your phone will display the first 24 digits, then a second screen
will show the digits remaining in the phone number.
Ending a Call
There are three ways to end a call:
Close Close the phone to end a call.
Phone
or
Press Key Press
Hold Press & hold
or
You will see: Press § to End Call .
Smart
Button Press
¡
to turn the phone ON.
Ç
to erase one digit at a time if you
æ
to place the call.
A A A A
until you hear a high tone.
‰
to see the rest of the number.
º
.
A A A A
until you hear a high tone.
A A A A
again to end the call.
Ç
to erase the