Switching The Warning Tone; Setting The Automatic Open Function; Setting The Clock - Pioneer AVX-7650 Operation Manual

Other Functions
(VIDEO 2/BACK CAMERA INPUT jack) when
a rear view camera is installed on your vehicle.
When the gear shift is in REVERSE (R) posi-
tion, the video automatically switches to a rear
view camera video. (For more details, consult
your dealer.)
! Confirm the setting immediately whether
the display changes to a rear view camera
video when the gear shift is moved to RE-
VERSE (R) from another position.
! When the display changes to a rear view
camera video during normal drivings,
switch to another setting.
! To return to the source display, press
V.ADJ.
1 Use a, b, c, d and A.MENU to select
AV INPUT2.
2 Press c or d to select B. CAMERA.
3 Press b to select POLARITY.
4 Press c or d to select an appropriate
setting for polarity.
Each press of c or d switches between the
following polarity:
! BATTERY  When the polarity of the con-
nected lead is positive while the gear shift
is in REVERSE (R) position
! GND  When the polarity of the connected
lead is negative while the gear shift is in RE-
VERSE (R) position

Switching the warning tone

If the front panel is not detached from this
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn
off the warning tone.
1 Use a, b, c, d and A.MENU to select
DT. WARNING.
2 Press a to turn warning tone on.
# To turn warning tone off, press b.
Setting the automatic open
function
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in P
(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.
Furthermore, to adjust the LCD panel slide po-
sition, you can turn the set back on or off.
1 Use a, b, c, d and A.MENU to select
FLAP SET.
2 Press a and the LCD panel slides to the
back.
# Press b and the LCD panel slides to the front.
3 Press c or d to select the display to
open/close automatically or manually.
Press c to select MANUAL, and you have to
press OPEN/CLOSE to open/close the display.
Press d to select AUTO, and the display auto-
matically opens/closes when power to this
unit is turned on.

Setting the clock

Use these instructions to set the clock.
1 Use a, b, c, d and A.MENU to select
CLOCK ADJ.
2 Press c or d to select OFF and then
press A.MENU to turn the clock display on.
ON will appear in the display instead of OFF.
Clock display is now on.
Section
05
13
En