Re-Write For Digital Soft Firmware - Sharp LC-26DV200E Service Manual

1 ．Prepare for USB Memory
1. USB Memory (Figure1) used for Update is connected with PC.
2. The Update software is downloaded.
3. The software is copied onto USB Memory.
4. The file name of the software copied onto USB Memory is changed. The following reference.
Before file name change：CA**Ixxxxx.bin
After file name change：AppBase.bin
*change the file name by normal-width.
5. USB Memory is detached from PC.

RE-WRITE FOR DIGITAL SOFT FIRMWARE

Figure1：USB Memory
↓
Figure2：Rename for File Name
C-3 C-3