Using The Radio (Fm); Starting Procedure; Reading The Screen - Pioneer AVIC-F200BT Operation Manual

Using the radio (FM)

You can listen to the radio by using the naviga-
tion system. This section describes operations
for radio (FM).
The functions related to RDS (Radio Data Sys-
tem) are available only in areas with FM sta-
tions broadcasting RDS signals. Even if the
navigation system is receiving an RDS station,
not all the functions related with RDS will be
available.

Starting procedure

1 Display the AV operation screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 61.
2 Tap [FM] on the left edge of the screen
to display the "FM" screen.
3 Use the touch panel keys on the screen
to control the radio.
= For details, refer to Using the touch panel
keys on the next page.

Reading the screen

2 3 4 5 6
1
e
1 Source icon
Shows which source has been selected.
2 Band indicator
Shows which band the radio is tuned to: FM1
to FM3.
3 Programme service name indicator
Shows the programme service name (station
name) of the current station.
7 8 9 a
b
c
d
4 Signal level indicator
5 Frequency indicator
6 STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
7 TEXT indicator
Shows when radio text is received.
8 NEWS indicator
Shows the status of news programmes.
9 TRFC indicator
Shows the status of traffic announcements.
a Current time
b Programme service name or frequency in-
dicator
Shows the frequency of the preset item. If the
programme service name can be obtained,
the programme service name is shown in-
stead of the frequency.
c Preset number indicator
Shows what preset item has been selected.
d PTY indicator
Shows the programme type of the current sta-
tion (when available).
e Radio text display area
Displays the radio text currently received.
Chapter
13
63
Engb