I30Sx Phone Faceplates And Keypads - Motorola i30sx User Manual

When Charging Battery
Icon
Display
1 flashing bar
Battery
Strength
NOTE: During the charging process, the battery icon will be flashing. In
addition, when the battery is fully charged, the battery icon will
show a fully charged battery.
i 30sx Phone Faceplates and Keypads
Your i30sx phone comes with a standard faceplate and keypad. You can order
additional face plates and keypads to change the look of your phone.
The following steps and accompanying illustration detail the procedure for
removing and replacing the changeable faceplate and keypad.
NOTE: Before replacing the faceplate, ensure that the keypad is
present and undamaged. For security and operational reasons,
power to the i30sx phone should be off prior to performing the
removal and replacement procedure. There is a protective
plastic liner over the lens. Peel off prior to operation.
Removal and Replacement Procedure
1
While holding the back of the phone, press the
faceplate release button located at the bottom of
the phone to release the faceplate. When you
press the release button, ensure that both sides
are disengaged from the faceplate prior to
removal.
2
In an upward motion, grasp the bottom part of the faceplate and detach
it from the phone.
e
1 flashing bar,
1 continuous bar
Low 31% - 60%
Battery

i30sx Phone Faceplates and Keypads

f g
1 flashing bar,
2 continuous bars
61% - 90%
h
3 continuous bars
Fully Charged
(90% -100%)
Release Button
15