Changing The Color System (Except For Latin American, European, And Russian Models); Setting The Clock; Changing The Display Mode - Sony MHC-GT3D Operating Instructions Manual

Note
The guide message appears when you
turn on the system for the first time or
after performing "RESET" (page 57).
Changing the color
system
(Except for Latin American,
European, and Russian models)
Set the color system to PAL or NTSC
depending on the color system of your
TV.
Each time you perform the procedure
below, the color system changes as
follows:
NTSC  PAL
Use the buttons on the subwoofer to
perform this operation.
1
Press  to turn on the system.
2
Press FUNCTION, then turn the
MULTI CONTROL knob to select
"DVD/CD", then press ENTER.
3
Hold down MIC ECHO and ENTER
for more than 3 seconds.
"NTSC" or "PAL" appears in the
display panel.
24 GB

Setting the clock

You cannot set the clock in Power
Saving Mode.
1
Press  to turn on the system.
2
Hold down SHIFT, then press
TIMER MENU.
"PLAY SET" appears in the display
panel. Press /
select "CLOCK", then press
3
Press / repeatedly to set the
hour, then press
4
Press / repeatedly to set the
minutes, then press
Changing the display
mode
Press DISPLAY repeatedly when the
system is turned off.
Demonstration
The demonstration is turned on.
No display (Power Saving Mode)
The display is turned off to conserve
power. The timer and clock continue to
operate.
Clock
The clock is displayed for a few
seconds, then enters the Power Saving
Mode.
repeatedly to
.
.
.