How Do I Operate The Electrode Steam; How Do I Use The Humidity Control - Honeywell Electrode Steam Homeowner's Manual

How do I operate the Electrode Steam?

Once the Electrode Steam is installed and running, operation is automatic. Use the humidity control provided to
make any changes to the setpoint, or to turn the Electrode Steam on or off.
Your Professional Installer configured the Electrode Steam so that it only creates steam when conditions in your
HVAC system are right. Steam can only be produced when your system fan is blowing air through the duct.
Ask your Professional Installer if you have questions about how to operate the Electrode Steam.
• How do I use the humidity control? Whenever humidity in the home is lower than the humidity control's
setpoint, the control will call for humidity. Some controls will also monitor outdoor conditions to ensure indoor
humidity does not condense on windows and walls. Refer to the manual provided with your humidity control for
instructions on setting the control. There are two different types of humidity control:
Thermostat with integrated humidity
control (such as Prestige IAQ, VisionPRO
8000, or Lyric).
This arrangement allows you to control your
furnace, central air conditioning, and Electrode
Steam, all with one device.
Steam Humidification System 33-00165—01
Humidity control separate from the thermostat
(such as the HumidiPRO).
With this arrangement, you will use your current
thermostat to control your furnace and central
air conditioning. Use the separate humidity
control to control your Electrode Steam.
9