U-Line 3060FZR User Manual page 61

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
To exit the Set Points menu, press
Menu" and press to confirm.
Factory Default
Up
Down
Factory Default will restore all settings to their factory
default.
To access Factory Default
1. Press to select "Factory Default".
2. Press .
To restore settings to their factory default.
3. Press to select "Restore?" and press
4. "Restore?" will change to "Restoring..." while settings
are restored. When restoration is complete,
"Restoring..." will return to "Restore?".
To exit Factory Default, press
Menu" and press to confirm.
to select "Return to
Select
RETURN TO MENU
FACTORY DEFAULT
RESTORE?
to select "Return to
Re-Select Model
Up
Down
NOTICE
Before altering model selection U-Line customer
service must be notified. Failure to notify
customer service will result in voiding of the
manufacturer warranty.
Re-Select Model allows the units model information to be
modified. Changing the units model completely
reprograms available zones, relay assignments, DC output
assignments etc.
To access Re-Select Model
1. Press to select "Re-Select Model".
2. Press .
To alter model setting.
3. Press to select "Model=" and press
begin to flash.
4. Press or to scroll through each available model.
5. Press to confirm.
To exit Re-Select Model, press
Menu" and press to confirm.
u-line.com
Select
RETURN TO MENU
RE-SELECT MODEL #
3018R
. "Model" will
to select "Return to
Control Operation - Service 7