Table of Contents
Advertisement
i DSK button
This button add is used to images or text to the
program output video (page 90). You can use it to
superimpose text and so on.
j Transition lever
This lever allows you to manually execute a
transition or effect (page 81).
k Indicators (Ff)
These indicators show the direction in which the
transition lever is being moved. Moving the
transition lever in the direction of the lit indicator
starts the transition or effect.
However, supposing you press the AUTO TRANS
button after moving the transition lever to the
middle, for example, an inconsistency between the
position of the fader and the application of the
effect will arise and both indicators will light.
l AUTO TRANS button
This button carries out an automatic transition
with a preset transition time, either from one video
to another or when applying an effect (page 81).
4 Device control section
Use these controls to remotely control a camera
with VISCA support connected to this unit (page
158), perform hard disk operations (material
recording, file playback) (pages 179, 181), perform
VCR playback operations (page 197), or to access
graphics files quickly (page 94).
1 Numeric buttons
7
8
9
4
5
6
1
2
3
FTB
2 PLAY
button
DSK
20
Names and Functions of Parts
3 STOP button
4 REW button
ENTER
8 Positioner
6 REC button
X-Y
7 SHIFT
REC
SHIFT
button
5 FFWD
button
9 Shuttle dial
JOG/SHUTTLE
0 Jog dial
a Numeric buttons
These buttons are used to access graphics files
quickly, register and recall video effect snapshots,
register and recall camera presets, reset cameras,
and cue up files (pages 94, 113, 160, 165, 187).
b PLAY button
This button plays back a file at normal speed.
Hold down the REC button and press this button,
to start recording on the hard disk (page 178).
c STOP button
This button stops file playback. Press shift and
then press this button to switch the source viewer
back from viewing a file on the hard disk to normal
input (page 183).
While recording to an external hard disk, press this
button while holding down the REC button to stop
recording (page 180).
While recording program output, press this button
while holding down the SHIFT and REC buttons
to stop recording (page 178).
d REW button
During file playback, play back fast in the reverse
direction. Each time you press, the reverse speed
increases (in six steps) (page 183).
e FFWD button
During file playback, play back fast in the forward
direction. Each time you press, the playback speed
increases (in six steps) (page 183).
f REC button
This button is used to start or stop the external hard
disk recording (page 179).
REC + NEXT
Reserve or cancel material
selection buttons
recording
REC + PLAY buttons Start material recording
REC + STOP buttons Stop material recording
SHIFT + REC +
Start program output
PLAY buttons
recording
SHIFT + REC +
Stop program output
STOP buttons
recording
g SHIFT button
This button is pressed while using other controls to
perform the following operations.
Advertisement
Table of Contents
