Knowyour Chain Saw; Chain Saw Features - Craftsman 172.452470 Operator's Manual

KNOWYOUR CHAIN SAW
=
I NOTE: Before attempting to use this product, familiarize yourself with all
pperating features and safety rules.
i
Your Chain Saw has a precision built electric motor and it should only be connected
to a 120-volt, 60 Hz AC ONLY power supply (normal household current). The electric
Chain Saw should always be used with a GFCI (Ground Fault Circuit Interrupter) outlet.
DO NOT operate this Chain Saw on direct current (DC). The large voltage drop would cause
a loss of power and the motor would overheat.
If the Chain Saw does not operate when plugged into correct 120-volt, 60 Hz AC ONLY outlet,
check the power supply. The Chain Saw comes with an electric plug and should be plugged
into a proper extension cord (See page 6).
TECHNICAL DATA:
• Voltage: 120V
• Rated power: 3.5 HP, 14 Amp
• Bar length: 16"
• Chain speed: 12m/s
• Oil tank capacity: 150ml
• Chain pitch: 3/8"
• Number of chain links: 57
• Chain gauge: 0.05"
• Saw chain type: Oregon®,16" (91PX057X)
• Bar type: Oregon ®, 16" (160SDEA041 )
• Weight (chain & bar included): 10.6 Ibs
• Protection class: []/11
CHAIN SAW FEATURES:
Power: 3.5 HP, 14 Amp motor.
Bar length: 16"
Chain brake - Auto and manual
Automatic lubrication system
Tool=less chain tension
Tool=less blade change
Large oil tank with visible gauge
Oregon ® chain and bar
Front metal bumper
Weight 11.00 LBS
(when filled with oil)
CHAIN SAW CALL=OUTS (See Figures 2 and 3 on page 15)
1. Rear handle (See Fig. 2)
2. On/Off switch (See Fig. 2)
3. Lock-off button (See Fig. 2)
4. Oil filler cap (See Fig. 2)
5. Front handle (See Fig. 2)
6. Activation lever for kickback brake (front Hand Guard) (See Fig. 2)
7. Chain Guide bar (See Fig. 2)
8. Chain (See Fig. 2)
9. Spiked bumper (See Fig. 2)
10. Plastic Chain/Bar/Blade protection cover (See Fig. 2)
11. Locking knob (See Fig. 2)
12. Chain tensioning adjustment knob(See Fig. 2)
13. Drive sprocket (See Fig. 3)
14. Guide fins for chain bar (See Fig. 3)
15. Symbol for rotation and cutting direction (See Fig. 3)
16. Chain tensioning catch (See Fig. 3)
17. Chain catcher (See Fig. 3)
18. Fastening bolt (See Fig. 3)
19. Oil level gauge (See Fig. 3) 14
20. Cover plate (See Figs. 2 and 3)
KNOWYOUR CHAIN SAW cont.
CHAIN SAW CALL=OUTS cont. (Figures 2 and 3)
Fig 2.
Fig 3.
Cover Plate
15
Chain Rotation