Flash Control; Battery Power Display; Playback Mode; Viewing Images - RCA CDS1005 User Manual

Flash Control

The digital camera is set by default to
automatically fire its flash if there is not
enough light for a picture. Flash firing
can be turned off manually as well.
To turn the flash off:
1. Make sure the camera is in record
mode ( ).
Use the /– button to
toggle between Flash
On ( ) and Flash Off
A
( ) in record mode.
2. Use the /– button at the lower left
of the LCD monitor to toggle
between Flash On (
Off ( ) in record mode.
Note: Flash On mode allows the
camera to automatically determine if
the flash needs to be fired. It will not
fire if there is enough light to take a
picture.

Battery Power Display

One icon that can show up in either
record or playback mode is the battery
power indicator (
should be replaced as soon as possible.
• Never allow dead batteries to remain
in the camera. Corrosion could
cause serious damage.
• Never mix different brands of
batteries.
• Never mix weak batteries with fresh
batteries.
• Dispose of batteries responsibly.
EV
+
EV +
0
•
1
NTSC
A
–
) and Flash
A
). Weak batteries
Adjusting Settings

Playback Mode

In playback mode (
camera is able to upload images to a
computer or TV screen, and erase
images that are no longer wanted.
Remember, to switch from Record
mode to Playback mode, quickly press
and release the menu button (
the playback mode icon (

Viewing Images

The easiest way to see the images you
have stored on the camera is to set up a
video line to a television.
Once connected, you can view images
through your TV's video input line.
1. Make sure the camera is turned on
and in playback mode (
2. Connect the video cable to the
camera's video out jack and the
other end of the cable to the TV's
Video In jack.
VIDEO PORT
3. Tune the TV to its video input line
(for more information about video
line, see the manual that came with
the TV).
4. Pictures from the camera should be
visible at this time. To see the next
picture stored, use the EV/+ button.
To see the previous picture number,
use the /– button.
Continued on the Next Page
) , the digital
) until
) appears.
).
TV
11