Table of Contents
Advertisement
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
– The washing machine is switched off.
– The machine is properly closed.
– The programme selector is at Finish .
A Press the START button and keep it
pressed in whilst carrying out steps
B to C.
B Switch the machine on with the
I-ON / 0-OFF button.
C Wait until the START indicator light
comes on . . .
D . . . and then release the START
button.
Programmable functions
E Turn the programme selector to the
COTTONS 75°C position:
The Soak/Pre-wash sequence indicator
light will briefly flash twice in 2 second
intervals, to show that factory Setting 2
is stored in memory.
F Each subsequent press on the
START button selects a different
setting (see list on previous page).
The Soak/Pre-wash sequence indicator
light will flash:
– x 1 = Setting 1
– x 2 = Setting 2
– x 3 = Setting 3
– x 4 = Setting 4
G Switch the machine off with the
I-ON / 0-OFF button.
The Water plus button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
59
Advertisement
Table of Contents
