Table of Contents
Advertisement
Problem
Possible Solution
Unit will not power on
Circuit fuse is blown
Circuit breaker is tripped
Battery is not charged
Battery is not fully
connected
Battery does not have
enough power
Battery has been removed
Device roamed out of
Bluetooth®
range
disconnected
Maintenance
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory opera-
tion depends upon proper tool/appliance care and regular
cleaning.
Warning! Switch off and unplug the appliance before carrying
out any cleaning.
Dirt and grease may be removed from the exterior of the
u
appliance using a cloth.
Warning! NEVER use solvents or other harsh chemicals
for cleaning the non-metallic parts of the appliance. These
chemicals may weaken the materials used in these parts. Use
a cloth dampened only with water and mild soap. Never let
any liquid get inside the unit; never immerse any part of the
unit into a liquid.
Warning! NEVER spray or in any other way apply lubricants
or cleaning solvents inside the tool. This can seriously affect
the life and performance of the tool.
Service Notes
Possible Cause
This product is not user serviceable. There are no user
serviceable parts inside the radio. Servicing at an authorized
Replace circuit fuse (if
the product repeatedly
service center is required to avoid damage to static sensitive
causes the circuit fuse
to blow, discontinue
internal components.
use immediately and
have it serviced at a
BLACK+DECKER
Protecting the environment
Z
service centre or
authorised servicer)
Reset circuit breaker (if
the product repeatedly
causes the circuit breaker
to trip, discontinue use
Should you find one day that your BLACK+DECKER product
immediately and have it
serviced at a
needs replacement, or if it is of no further use to you, do not
BLACK+DECKER service
dispose of it with household waste. Make this product avail-
centre or authorised
servicer)
able for separate collection.
Charge battery
z
Push battery fully into the
battery port and ensure it
is properly connected
Charge battery
Replace battery
Bring device into range of
Local regulations may provide for separate collection of elec-
radio
trical products from the household, at municipal waste sites or
Device may need to be
paired to the radio again,
by the retailer when you purchase a new product.
see "Using Bluetooth
Wireless Technology"
BLACK+DECKER provides a facility for the collection and re-
If two or more devices are
cycling of BLACK+DECKER products once they have reached
paired to speaker,
disconnect the speaker
the end of their working life. To take advantage of this service
in the settings of the one
of the devices.
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local BLACK+DECKER office at the
address indicated in this manual. Alternatively, a list of author-
ised BLACK+DECKER repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
u
u
u
u
(Original instructions)
Separate collection. This product must not be
disposed of with normal household waste.
Separate collection of used products and packag-
ing allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
At the end of their useful life, discard batteries with
due care for our environment:
Run the battery down completely, then remove it from the
tool.
NiCd, NiMH and Li-Ion batteries are recyclable. Place
the battery(s) in a suitable packaging to ensure that the
terminals cannot be short-circuited. Take them to any
authorised repair agent or a local recycling station.
Do not short-circuit the battery terminals.
Do not dispose of the battery(s) in a fire as this may result
in a risk of personal injury or an explosion.
ENGLISH
5
Advertisement
Table of Contents
