Sharp XG-MB67X Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Projector
  5. XG-MB67X
  6. Service manual
Sharp XG-MB67X Service Manual

Sharp XG-MB67X Service Manual

Hide thumbs Also See for XG-MB67X:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual, Setup Manual
TopPage
In the interests of user-safety (Required by safety regulations in some countries) the set should be re-
stored to its original condition and only parts identical to those specified should be used.
[1]
SPECIFICATIONS ................................. . ....... 1-1
[1]
Operation Manual................................... . ....... 2-1
[1]
DIMENSIONS ........................................ . ....... 3-1
[1]
REMOVING OF MAJOR PARTS ........... . ....... 4-1
[1]
Resetting the total lamp timer ................ . ....... 5-1
[1]
THE OPTICAL UNIT OUTLINE.............. . ....... 6-1
[1]
ELECTRICAL ADJUSTMENT................ . ....... 7-1
[2]
Adjustment mode process menu............ . ....... 7-4
[3]
(lamp power) .......................................... . ....... 7-5
[1]
TROUBLE SHOOTING TABLE.............. . ....... 8-1
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.

SERVICE MANUAL

MULTIMEDIA PROJECTOR
MODEL
CONTENTS
[1]
MAJOR IC INFOMATIONS............................9-1
[1]
BLOCK DIAGRAM.......................................10-1
[2]
OVERALL WIRING DIAGRAM ....................10-3
CHAPTER 11. PRINTED WIRING BOARD
[1]
MAIN Unit .................................................... 11-1
[2]
DMD Unit ..................................................... 11-9
[3]
POWER Unit.............................................. 11-11
[4]
BALLAST CONTROL Unit......................... 11-17
[5]
PHOTOSENSOR Unit ............................... 11-19
[6]
R/C Unit ..................................................... 11-20
[1]
WAVEFORMS .............................................12-1
CHAPTER 13. SCHEMATIC DIAGRAM
[1]
GRAM..........................................................13-1
[2]
SCHEMATIC DIAGRAM ..............................13-2
XG-MB67X
No. S36S2XG-MB67X
XG-MB67X
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.

Advertisement

Table of Contents
loading

Related Manuals for Sharp XG-MB67X

Summary of Contents for Sharp XG-MB67X

  • Page 1: Table Of Contents

    TopPage XG-MB67X SERVICE MANUAL No. S36S2XG-MB67X MULTIMEDIA PROJECTOR XG-MB67X MODEL In the interests of user-safety (Required by safety regulations in some countries) the set should be re- stored to its original condition and only parts identical to those specified should be used.

  • Page 2: Safety Precaution

    XG-MB67X XG-MB67X SAFETY PRECAUTION Service Manual IMPORTANT SERVICE SAFETY NOTES IMPORTANT SERVICE SAFETY NOTES (for USA) Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and servicing guidelines as follows: WARNING Use an AC voltmeter with sensitivity of 5000 ohm per volt., or higher, sensitivity to measure the AC voltage...
  • Page 3 XG-MB67X PRECAUTIONS A PRENDRE LORS DE LA REPARATION Ne peut effectuer la réparation qu' un technicien spécialisé qui s'est parfaitement accoutumé à toute vérification de sécurité et aux conseils suivants. AVERTISSEMENT conduite électrique ou une prise de terre branchée à la 1.

  • Page 4: Note To Service Personnel

    XG-MB67X NOTE TO SERVICE NOTE POUR LE PERSONNEL PERSONNEL D’ENTRETIEN ////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////// UV-RADIATION PRECAUTION PRECAUTION POUR LES RADIATIONS UV ////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////// La source de lumière, la lampe UHP, dans le projecteur The light source, UHP lamp, in the LCD projector LCD émet de petites quantités de radiation UV.

  • Page 5: Lamp Replacement

    XG-MB67X //////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////// UV-RADIATION PRECAUTION (Continued) PRECAUTION POUR LES RADIA TIONS UV (Suite) //////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////// Lamp Replacement Remplacement de la lampe Remarque: Note: Since the lamp reaches a very high temperature during Comme la lampe devient très chaude pendant le units operation replacement of the lamp should be fonctionnement de l’unité, son remplacement ne doit...

  • Page 6: Power Unit

    XG-MB67X WARNING: High brightness light source, do not stare into the beam of light, or view directly. Be especially careful that children do not stare directly in to the beam of light. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO MOISTURE OR WET LOCATIONS.

  • Page 7: Precautions For Using Lead-Free Solder

    XG-MB67X Precautions for using lead-free solder Employing lead-free solder • "PWBs" of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.

  • Page 8: Chapter 1. Specifications

    DIN-D-sub RS-232C adaptor, Operation manual (Printed and CD-ROM) As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement with- out prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

  • Page 9: Chapter 2. Operation Manual

    XG-MB67X CHAPTER 2. XG-MB67X OPERATION MANUAL Service Manual [1] Operation Manual Top View Front View 2 – 1...
  • Page 10 XG-MB67X Front View 2 – 2...
  • Page 11 XG-MB67X 2 – 3...
  • Page 12 XG-MB67X 2 – 4...
  • Page 13 XG-MB67X Rear View 2 – 5...

  • Page 14: Connecting Pin Assignments

    XG-MB67X Connecting Pin Assignments COMPUTER-RGB/COMPONENT INPUT 1, 2 and COMPUTER-RGB/COMPONENT OUTPUT Terminals: 15-pin mini D-sub female connector COMPUTER-RGB Input/Output Component Input/Output 1. Video input (red) 1. P 2. Video input (green/sync on green) 2. Y 3. Video input (blue) 3. P 4.

  • Page 15: Chapter 3. Dimensions Dimensions

    XG-MB67X CHAPTER 3. XG-MB67X DIMENSIONS Service Manual [1] DIMENSIONS 3 – 1...

  • Page 16: Chapter 4. Removing Of Major Parts

    XG-MB67X CHAPTER 4. XG-MB67X REMOVING OF MAJOR PARTS Service Manual [1] REMOVING OF MAJOR PARTS 1. Removing the lamp door and the lamp unit 1. Loosen the lamp door fixing screw. Lift off the lamp door. 2. Remove 2 lamp unit fixing screws to detach the lamp unit.
  • Page 17 XG-MB67X 2. Removing the top body 1. Remove 8 top body fixing screws to detach the Top body. Top Body Bottom Body 3. Removing the main PWB unit 1. Remove all connectors from the main PWB unit. 2. Remove 2 terminal fixing screws.
  • Page 18 XG-MB67X 4. Removing the speaker, fan, and power / ballast ass’y 1. Remove the speaker. 2. Remove 2 fans for the power/ballast ass’y and 1 fan for the optical mechanism unit. 3. Remove 2 bimetal fixing screws to detach the bimetal.
  • Page 19 XG-MB67X 5. Removing the optical mechanism unit and RC light receiver PWB 1. Remove 4 optical mechanism unit fixing screws to detach the optical mechanism unit. 2. Remove the R/C PWB unit. Optical Mechanism Unit R/C PWB 6. Removing the photosensor PWB unit, blower fan, DMD PWB, and DMD 1.

  • Page 20: Chapter 5. Resetting The Total Lamp Timer

    The lamp life (percentage) can be checked with the on-screen display. • Purchase a replacement lamp of type AN-XR20LP from your place of purchase, nearest Sharp Authorized Projector Dealer or Service Center. •...
  • Page 21 XG-MB67X • Keystone correction range expansion and vertical compression adjustment function The variable range of the keystone can be expanded to over the user adjustable range by using the following RS-232C commands. In addition, the vertical compression can be adjusted.

  • Page 22: Chapter 6. The Optical Unit Outline

    XG-MB67X CHAPTER 6. XG-MB67X THE OPTICAL UNIT OUTLINE Service Manual [1] THE OPTICAL UNIT OUTLINE Layout for proper setup of the optical components and parts (top view) (Schematic diagram) Projection lens Illumination lens 2 Illumination lens 1 Reflection mirror Plastic Lens...
  • Page 23 XG-MB67X If shading shown in Figure 1 appears on the screen after replacing DMD, turn the adjustment screw of the optical engine to adjust the lighting area of DMD. 1. Loosen the adjustment lever fixing screw . After adjusting the lighting area with the adjustment lever...

  • Page 24: Chapter 7. Electrical Adjustment Electrical Adjustment

    XG-MB67X CHAPTER 7. XG-MB67X ELECTRICAL ADJUSTMENT Service Manual [1] ELECTRICAL ADJUSTMENT Adjusting point Adjusting conditions Adjusting procedure •Make the following settings. EEPROM initialization 1. Turn on the power (with the lamp on) and warm up the set for 15 minutes.
  • Page 25 XG-MB67X Check items Adjusting point Adjusting conditions Adjusting procedure Adjustment of RGB brightness 1. Select the following group and subjects. 1. Check the fixed value. Group : CONFIRM/AD Fixed value : 127 Subject : R-BRIGHT G-BRIGHT B-BRIGHT (Process GAMMA interlock) Adjustment of Component offset 1.
  • Page 26 XG-MB67X Adjusting point Adjusting conditions Adjusting procedure Monitor out check 1. Send signals to INPUT 1 and INPUT 2. 1. Check that the same images as seen on the screen 2. Connect another monitor to the monitor appear on the connected monitor and that the sound out.

  • Page 27: Adjustment Mode Process Menu

    XG-MB67X [2] Adjustment mode process menu 1st Layer 2nd Layer Default ADJUST CW/Auto KS CW-INDEX K-SENS AD/DLP R-CONT G-CONT B-CONT R-GAIN G-GAIN B-GAIN — — — — — — CONFIRM R-BRIGHT G-BRIGHT B-BRIGHT C-R-OS C-B-OS R-BLK G-BLK B-BLK S-R-OS S-G-OS...

  • Page 28: Adjustment Of Ballast Unit Output Power (Lamp Power)

    Connecting Cord (QCNW-E007WJZZ) [Adjustment method] 1. Unplug the ballast unit lamp cable(QCNW-E583WJQZ) of the XG-MB67X projector from the lamp and connect the cable to the connecting cord (QCNW-E007WJZZ). 2. Connect the connecting cord (QCNW-E007WJZZ) to the adjustment jig (RUNTZA018WJZZ). 3. Connect TP1 of the adjustment jig (RUNTZA018WJZZ) to the negative terminal of the tester and TP2 to the positive terminal.

  • Page 29: Chapter 8. Trouble Shooting Table

    XG-MB67X CHAPTER 8. XG-MB67X TROUBLE SHOOTING TABLE Service Manual [1] TROUBLE SHOOTING TABLE Checking the basic operation Does the power LED light up or Has P1701 come off or is it Fully insert the connector. flash in red or green?
  • Page 30 XG-MB67X Main PWB check Is 6 V applied to TL1702 and 13 V to Go to "Power supply ballast PWB check". TL1703? Is approx. 6 V applied to TL1742? Check IC1742 and peripheral circuits. Is 1.5 V applied to TL1741? Check IC1741 and peripheral circuits.
  • Page 31 XG-MB67X DMD system check Check P2501 for breakage and solder crack and peripheral resistance for solder crack. Check SC9101 for breakage and solder crack. Is there any vertical stripe The main PWB and DMD PWB are in poor (block noise) on the screen? contact.
  • Page 32 XG-MB67X Is approx. 7 V applied to Check IC9301 and peripheral circuits. TL9303? Is approx. 26 V applied to Check IC9301 and peripheral circuits. TL9301? Is approx. -26 V applied to Check IC9301 and peripheral circuits. TL9302? The main PWB and DMD PWB are in poor contact.
  • Page 33 XG-MB67X Power supply PWB- check Is 6 V applied to pins (7) and (8) of the con- nector P704? Is 13 V applied to Check peripheral cir- pins (3) and (4) of the cuits of IC703. connector P704? Does the lamp turn...
  • Page 34 XG-MB67X Are connectorsP701 and P702 fully Securely insert the connectors. inserted? Is AC voltage between 100 – 240 V Replace F701. applied to both ends of C707? Is the bimetal broken? (Connection Press the red button on the between 1 and 2 of P702) bimetal.
  • Page 35 XG-MB67X Checking the lamp light-up Does the lamp turn on Go to "Check when the when the power is turned lamp turns off soon after turning on". Is the lamp tight in the Securely insert the con- socket? nectors. Has the FPC cable to...
  • Page 36 XG-MB67X Check when the lamp turns off soon after turning on Have connectors P1703, Securely insert the connec- P1721, P1722, P1723 and tors. P1724 come off or are they loose? Is each cooling fan rotating? Check the cooling fan. Is approx. 3 V applied to...
  • Page 37 XG-MB67X RGB and component signal check Send component signal or RGB signal of 1080i (or 720P) from INPUT 1 or INPUT 2. Select INPUT 1 or INPUT 2 using keys on the main unit or the remote control. Is image displayed normally?
  • Page 38 XG-MB67X S-VIDEO (INPUT 3) VIDEO (INPUT 4) check check Send S-Video signal Send VIDEO signal from (color signal) from INPUT 4. Use buttons INPUT 3. Select INPUT on the main unit or the 3 using keys on the remote control to select main unit or the remote INPUT 4.
  • Page 39 IC8003 (EEP ROM)" to reset. Are the network device (e.g. Hub) between Repair defective parts in the network. the control PC and XG-MB67X and cable normal? When data is sent from the control PC, do Check the peripheral circuit of J8201 (RJ-45 jack with built- pins (30) and (31) of IC8201 (PHY receiver) in transformer).

  • Page 40: Chapter 9. Major Ic Infomations

    XG-MB67X CHAPTER 9. XG-MB67X MAJOR IC INFOMATIONS Service Manual [1] MAJOR IC INFOMATIONS 1. Resetting after replacing IC8003 (EEP ROM) MAC address returns to default. Follow the steps below to reset. Open the top cabinet of the projector and confirm the MAC address (MAC: ************) of the seal on the PWB.
  • Page 41 XG-MB67X — MEMO — 9 – 2...

  • Page 42: Chapter 10. Block Diagram/Overall Wir- Ing Diagram Block Diagram

    XG-MB67X CHAPTER 10. XG-MB67X BLOCK DIAGRAM/OVERALL WIRING DIAGRAM Service Manual [1] BLOCK DIAGRAM BALLAST UNIT 10 – 1...
  • Page 43 XG-MB67X MAIN UNIT TEMP Sensor RC UNIT SENSOR UNIT Color Wheel DMD UNIT 10 – 2...

  • Page 44: Overall Wiring Diagram

    XG-MB67X [2] OVERALL WIRING DIAGRAM POWER UNIT 10 – 3...
  • Page 45 XG-MB67X 10 – 4...

  • Page 46: Main Unit

    XG-MB67X CHAPTER 11. XG-MB67X PRINTED WIRING BOARD Service Manual [1] MAIN Unit MAIN Unit (Side-A) 11 – 1...
  • Page 47 XG-MB67X 11 – 2...
  • Page 48 XG-MB67X MAIN Unit (Side-A Chip) P1703 P1721 R1704 R1706 FB1712 FB1713 R1719 C1706 P2533 R2528 R2529 R2507 R2509 R2511 R2513 R2515 R2517 R2522 C2002 FB1708 IC2001 FB1709 C2028 R2001 C2003 R2525 R2506 R2508 R2510 R2512 R2514 R2516 R2521 C2001 C2031...
  • Page 49 XG-MB67X P3562 P1702 P1721 SC3581 P1705 FB3584 FB3585 L1723 L1727 R1707 FB1729 C1724 FB1728 C3591 C3586 C3588 D1725 FB1727 Q1724 R1762 C1718 R1728 FB1732 FB1731 D1726 FB1730 D2573 D2572 D2571 S2552 Q1705 Q1706 R1702 S2555 D1701 C1701 C1703 C8028 C8041...
  • Page 50 XG-MB67X MAIN Unit (Side-B) 11 – 5...
  • Page 51 XG-MB67X 11 – 6...
  • Page 52 XG-MB67X MAIN Unit (Side-B Chip) R3578 C3571 TH3561 R3577 D1702 C1704 C3594 D1723 D3584 R1725 TL1722 D3581 D3582 D3583 C3592 C1728 R1722 R1723 TL1721 R3597 C3595 C3583 C1771 R1724 R1721 R3596 R1764 IC1762 R3595 IC3581 R1765 D1765 L1728 L1724 R3594...
  • Page 53 XG-MB67X P2501 D1723 Q1722 C1771 IC1762 R2021 FB2251 C1768 D1765 C2254 C2231 D2231 X2251 C2232 R2520 R2232 C2233 IC2231 C1773 R2234 C1772 R2235 R1771 R2231 R2519 L2005 D1762 R1768 R2242 C2247 R1770 R2243 C1763 R1738 R2248 R1755 Q1709 R2245 C1709...

  • Page 54: Dmd Unit

    XG-MB67X [2] DMD Unit DMD Unit (Side-A) DMD Unit (Chip Parts Side-A) TH9102 C9102 C9101 R9103 C9507 C9313 FB9302 C9505 C9310 C9511 C9307 C9501 11 – 9...
  • Page 55 XG-MB67X DMD Unit (Side-B) 11 – 10...

  • Page 56: Power Unit

    XG-MB67X [3] POWER Unit POWER Unit (Side A) 11 – 11...
  • Page 57 XG-MB67X 11 – 12...
  • Page 58 XG-MB67X POWER Unit (Side B) 11 – 13...
  • Page 59 XG-MB67X 11 – 14...
  • Page 60 XG-MB67X POWER Unit (Chip parts Side B) R762 R708 R711 C703 R707 C713 C705 C706 R710 R703 R704 R705 R706 C702 D705 R702 R718 D704 R732 C708 R728 R712 D722 R715 R721 R725 D706 D707 R730 R731 D719 R763 D720...
  • Page 61 XG-MB67X FB701 R708 FB702 R707 R706 R759 R760 R758 R757 R736 C724 R735 R752 R754 R756 C723 R743 R753 C736 R751 R755 D710 R738 R737 D708 R750 C701 R742 R733 C739 R740 R748 C921 R942 R918 R940 C905 C904 C919...

  • Page 62: Ballast Control Unit

    XG-MB67X [4] BALLAST CONTROL Unit BALLAST CONTROL Unit (Side A) BALLAST CONTROL Unit (Chip Parts Side A) R7704 P7701 C7701 D7715 R7708 R7761 C7745 D7714 IC7707 C7709 C7727 R7719 R7775 R7776 D7713 C7742 C7712 C7713 C7728 R7726 C7710 R7793 R7721...
  • Page 63 XG-MB67X BALLAST CONTROL Unit (Side B) BALLAST CONTROL Unit (Chip Parts Side B) R7702 R7703 C7735 IC7704 R7705 C7702 R7739 Q7702 R7710 C7706 Q7701 C7705 C7708 C7703 R7748 R7781 C7704 R7788 Q7711 R7728 R7713 R7756 R7718 R7711 IC7705 R7786 R7785...

  • Page 64: Photosensor Unit

    XG-MB67X [5] PHOTOSENSOR Unit PHOTOSENSOR Unit (Side-A) PHOTOSENSOR Unit (Side B) PHOTOSENSOR Unit (Chip Parts Side B) R1109 R1108 R1106 R1107 11 – 19...

  • Page 65: R/C Unit

    XG-MB67X [6] R/C Unit R/C Unit (Side-A) R/C Unit (Side B) 11 – 20...

  • Page 66: Chapter 12. Waveforms

    XG-MB67X CHAPTER 12. XG-MB67X WAVEFORMS Service Manual [1] WAVEFORMS 12 – 1...

  • Page 67: Description Of Schematic Dia

    XG-MB67X CHAPTER 13. XG-MB67X SCHEMATIC DIA- Service Manual GRAM [1] DESCRIPTION OF SCHEMATIC DIA- GRAM 1. VOLTAGE MEASUREMENT CONDITION: 1. Voltages at test points are measured at the supply voltage of AC 220V. Signals are fed by a color bar signal generator for servicing purpose and the above voltages are measured with a 20k ohm/V tester.

  • Page 68: Schematic Diagram

    XG-MB67X [2] SCHEMATIC DIAGRAM MAIN Unit-1/10 13 – 2...
  • Page 69 XG-MB67X 13 – 3...
  • Page 70 XG-MB67X MAIN Unit-2/10 13 – 4...
  • Page 71 XG-MB67X 13 – 5...
  • Page 72 XG-MB67X MAIN Unit-3/10 13 – 6...
  • Page 73 XG-MB67X 13 – 7...
  • Page 74 XG-MB67X MAIN Unit-4/10 13 – 8...
  • Page 75 XG-MB67X 13 – 9...
  • Page 76 XG-MB67X MAIN Unit-5/10 13 – 10...
  • Page 77 XG-MB67X 13 – 11...
  • Page 78 XG-MB67X MAIN Unit-6/10 13 – 12...
  • Page 79 XG-MB67X 13 – 13...
  • Page 80 XG-MB67X MAIN Unit-7/10 13 – 14...
  • Page 81 XG-MB67X 13 – 15...
  • Page 82 XG-MB67X MAIN Unit-8/10 13 – 16...
  • Page 83 XG-MB67X 13 – 17...
  • Page 84 XG-MB67X MAIN Unit-9/10 13 – 18...
  • Page 85 XG-MB67X 13 – 19...
  • Page 86 XG-MB67X MAIN Unit-10/10 13 – 20...
  • Page 87 XG-MB67X 13 – 21...
  • Page 88 XG-MB67X DMD Unit-1/3 13 – 22...
  • Page 89 XG-MB67X 13 – 23...
  • Page 90 XG-MB67X DMD Unit-2/3 13 – 24...
  • Page 91 XG-MB67X 13 – 25...
  • Page 92 XG-MB67X DMD Unit-3/3 13 – 26...
  • Page 93 XG-MB67X 13 – 27...
  • Page 94 XG-MB67X BALLAST CONTROL Unit 13 – 28...
  • Page 95 XG-MB67X 13 – 29...
  • Page 96 XG-MB67X POWER Unit 13 – 30...
  • Page 97 XG-MB67X 13 – 31...
  • Page 98 XG-MB67X PHOTOSENSOR UNIT 13 – 32...
  • Page 99 XG-MB67X R/C UNIT 13 – 33...
  • Page 100 XG-MB67X — MEMO — 13 – 34...

  • Page 101: Parts Guide

    XG-MB67X PartsGuide PARTS GUIDE MULTIMEDIA PROJECTOR XG-MB67X MODEL CONTENTS PRINTED WIRING BOARD R/C Reciever Unit ASSEMBLIES (Order the Power/Ballast Ass'y CABINET AND MECHANICAL (DSETUD147FMG0) when replacing PARTS the Power Unit) OPTICAL MECHANISM PARTS Main Unit [10] SUPPLIED ACCESSORIES DMD Unit...
  • Page 102 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [1] PRINTED WIRING BOARD ASSEMBLIES (Order the Power/Ballast Ass'y (DSETUD147FMG0) when re- placing the Power Unit) Main Unit DUNTKD865FMF0 DMD Unit DUNTKD140WEF0 Photo Sensor Unit DUNTKD141WEF3 Power/Ballast Ass'y DSETUD147FMG0 Power Unit...
  • Page 103 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [2] Main Unit C2015 Capacitor, 100 6.3V Electrolytic VCEAPF0JW107MY C2016 Capacitor, 0.1 25V Ceramic VCKYCY1EF104ZY C2018 Capacitor, 10 6.3V Ceramic RC-KZA101WJZZY C2019 Capacitor, 0.1 25V Ceramic VCKYCY1EF104ZY C2020 Capacitor, 10 6.3V Ceramic...
  • Page 104 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [2] Main Unit C3151 Capacitor, 82p 50V Ceramic VCCCCY1HH820JY C3152 Capacitor, 82p 50V Ceramic VCCCCY1HH820JY C3153 Capacitor, 220p 50V Ceramic VCCCCY1HH221JY C3154 Capacitor, 220p 50V Ceramic VCCCCY1HH221JY C3201 Capacitor, 0.047 25V Ceramic...
  • Page 105 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [2] Main Unit C3561 Capacitor, 0.1 25V Ceramic VCKYCY1EF104ZY C3562 Capacitor, 0.1 25V Ceramic VCKYCY1EF104ZY C3563 Capacitor, 0.1 16V Ceramic VCKYCY1CB104KY C3564 Capacitor, 0.1 25V Ceramic VCKYCY1EF104ZY C3565 Capacitor, 10 6.3V Ceramic...
  • Page 106 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [2] Main Unit D1733 Diode, RB551V-30TE-17 VHDRB551V30-1Y D1741 Diode, HZU2.0BTRF RH-EX1224CEZZY D1742 Diode, SFPA-73VL VHDSFPA73//2EY D1761 Diode, BAS316,115 VHDBAS316//-1Y D1762 Diode, HZU3.6B2TRF RH-EX1234CEZZY D1764 VHDSFPA73//2EY Diode, SFPA-73VL D1765 Diode, BAS316,115 VHDBAS316//-1Y...
  • Page 107 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [2] Main Unit FB1741 Balun, BLN-A303WJ RBLN-A303WJZZY FB1761 Balun, BLN-A303WJ RBLN-A303WJZZY FB2001 Balun, BLN-A215WJ RBLN-A215WJZZY FB2002 Balun, BLN-A212WJ RBLN-A212WJZZY FB2201 Balun, BLN-A215WJ RBLN-A215WJZZY FB2241 RBLN-A215WJZZY Balun, BLN-A215WJ FB2251 Balun, BLN-A215WJ RBLN-A215WJZZY...
  • Page 108 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [2] Main Unit IC2561 IC, ISL83220ECVZ-T VHiiSL83220-1Y IC2562 IC, SN74LV4053APWR VHiLV4053AT-1Y IC3001 IC, P EEPROM RH-iXB702WJZZS IC3002 IC, EL8302IUZ-T7 VHiEL8302iU-1Y IC3051 IC, P EEPROM RH-iXB702WJZZS IC3052 VHiEL8302iU-1Y IC, EL8302IUZ-T7 IC3101 IC, TC74VHCT125AFT(EL)
  • Page 109 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [2] Main Unit Q3521 Transistor, 2SC3928A-T112-1R VS2SC3928AR-1Y Q3524 Transistor, 2SC3928A-T112-1R VS2SC3928AR-1Y Q3534 Transistor, 2SA1530A-T112-1R VS2SA1530AR-1Y Q3535 Transistor, 2SC3928A-T112-1R VS2SC3928AR-1Y Q3536 Transistor, 2SC3928A-T112-1R VS2SC3928AR-1Y Q3601 VS2SC3928AR-1Y Transistor, 2SC3928A-T112-1R Q8001 Transistor, PDTC114EE VSRDTC114EE-1Y...
  • Page 110 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [2] Main Unit R2020 Resistor, 3.3k 1/16W Metal Oxide VRS-CJ1JF332JY R2021 Resistor, 3.3k 1/16W Metal Oxide VRS-CJ1JF332JY R2201 Resistor, 110 1/16W Metal Oxide VRS-CY1JF111FY R2202 Resistor, 33 1/16W Metal Oxide VRS-CY1JF330FY...
  • Page 111 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [2] Main Unit R3006 Resistor, 47k 1/16W Metal Oxide VRS-CY1JF473JY R3007 Resistor, 100 1/16W Metal Oxide VRS-CH1JF101JY R3008 Resistor, 1k 1/16W Metal Oxide VRS-CY1JF102JY R3009 Resistor, 0 1/16W Metal Oxide VRS-CY1JF000JY...
  • Page 112 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [2] Main Unit R3302 Resistor, 3.3k 1/16W Metal Oxide VRS-CY1JF332JY R3303 Resistor, 5.6k 1/16W Metal Oxide VRS-CY1JF562JY R3304 Resistor, 220 1/16W Metal Oxide VRS-CY1JF221JY R3305 Resistor, 47 1/16W Metal Oxide VRS-CY1JF470JY...
  • Page 113 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [2] Main Unit R3576 Resistor, 10k 1/16W Metal Oxide VRS-CY1JF103JY R3577 Resistor, 4.7k 1/16W Metal Film VRN-CY1JF472DY R3578 Resistor, 180k 1/16W Metal Oxide VRS-CY1JF184FY R3580 Resistor, 0 1/16W Metal Oxide VRS-CY1JF000JY...
  • Page 114 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [2] Main Unit S8001 Switch, 3Pin QSW-SA020WJZZY SC2561 Switch, 12Pin QSOCDA036WJZZ SC3001 Switch, 17Pin, INPUT1 QSOCNA230WJZZ SC3051 Switch, 17Pin, INPUT2 QSOCNA230WJZZ SC3101 Switch, 17Pin, OUTPUT QSOCNA229WJZZ SC3581 QCNCWA500WJZZY Socket, 4Pin(MO) X2251...
  • Page 115 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [5] Power Unit C702 Capacitor, 0.01 50V Ceramic VCKYCY1HB103KY C703 Capacitor, 1000p 50V Ceramic VCKYCY1HB102KY C704 Capacitor, 330 420V Electrolytic RC-EZA572WJZZ C705 Capacitor, 0.47 25V Ceramic VCKYTV1EB474KY C706 Capacitor, 0.033 25V Ceramic...
  • Page 116 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [5] Power Unit F705 QFS-TA005WJZZ Thermal Fuse, 127°C FB701 Balun, BLN-0094CE RBLN-0094CEZZY FB702 Balun, BLN-0094CE RBLN-0094CEZZY FB704 Balun, BLN-A007WJ RBLN-A007WJZZY FB705 Balun, BLN-A007WJ RBLN-A007WJZZY FB706 Balun, BLN-A007WJ RBLN-A007WJZZY FB707 Balun, BLN-0020CE...
  • Page 117 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [5] Power Unit R759 Resistor, 680 1/4W Metal Oxide VRS-TQ2EF681JY R760 Resistor, 680 1/4W Metal Oxide VRS-TQ2EF681JY R762 Resistor, 120k 1/10W Metal Film VRN-TV1JD124DY R763 Resistor, 100 1/4W Metal Oxide VRS-TQ2EF101JY...
  • Page 118 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [6] Ballast Control Unit C7722 Capacitor, 1 25V Ceramic RC-KZA114WJZZY C7723 Capacitor, 1 25V Ceramic RC-KZA114WJZZY C7724 Capacitor, 0.1 50V Ceramic VCKYCY1HF104ZY C7725 Capacitor, 0.022 25V Ceramic VCKYCY1EB223KY C7726 Capacitor, 0.022 25V Ceramic...
  • Page 119 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [6] Ballast Control Unit R7734 Resistor, 4.7k 1/16W Metal Oxide VRS-CY1JF472JY R7735 Resistor, 1k 1/16W Metal Oxide VRS-CY1JF102JY R7736 Resistor, 4.7k 1/16W Metal Oxide VRS-CY1JF472JY R7737 Resistor, 4.7k 1/16W Metal Oxide...
  • Page 120 XG-MB67X [8] CABINET AND MECHANICAL PARTS 11-3 11-2 11-1 2-2-3 2-2-4 2-2-1 2-2-2 2-8-1 2-8-2 2-1-4 2-1-3 2-1-1 2-7-1 2-7-2 2-1-2...
  • Page 121 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [8] CABINET AND MECHANICAL PARTS Top Body Ass'y DBDYTA165WEF0 Top Body Not Available LED Cover HDECPA027WJSA Operation Cover HINDPB309WJSC Power Button JBTN-A463WJSA Bottom Body Ass'y Not Available Lamp Door Ass'y CDORUA054WEF0...
  • Page 122 XG-MB67X [9] OPTICAL MECHANISM PARTS 4-29 4-32 4-29 4-12 4-29 4-26 4-16 4-29 4-29 4-29 4-13 4-11 4-25 4-29 4-5-1 4-31 4-29 4-34 4-5-4 4-22 4-35 4-17 4-30 4-5-3 4-18 4-5-2 4-23 4-19 4-29 4-24 4-20 4-21 4-27 4-15 4-31...
  • Page 123 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [9] OPTICAL MECHANISM PARTS Lens Cap Ass'y CCAPHA024WJSA Optical Mechanism Unit CCHSKA019WEF8 Engine Base LCHSKA019WJF1 Mirror Holder LHLDZA572WJKZ Rod Holder Base LHLDZA573WJKZ Rod Holder Cover LHLDZA574WJKZ Colour Wheel Ass'y CFILWA097WEF0 4-5-1...
  • Page 124 XG-MB67X [10] SUPPLIED ACCESSORIES X5 X6 PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [10] SUPPLIED ACCESSORIES RRMCGA398WJSA Remote Control AC Cord for U.K. and Singapore QACCBA036WJPZ AC Cord for USA and Canada QACCDA007WJPZ AC Cord for Australia, New Zealand and Oceania...
  • Page 125 XG-MB67X [11] PACKING PARTS (NOT REPLACEMENT ITEM) PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [11] PACKING PARTS (NOT REPLACEMENT ITEM) Packing Case SPAKCC741WJZZ Accessory Case SPAKFA792WJZZ Wrapping Paper SPAKPA360WJZZ Buffer Material SPAKXA768WJZZ Bar Code Label TLABVA333WJZZ Recycle Label (67XE) TLABZA610WJZZ C.W.Mark (67XE/XK)
  • Page 126 XG-MB67X PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [12] SERVICE JIGS Extension Cable, 3pins Main to Fan x2 QCNW-C561WJQZ Extension Cable, 4pins Main to Fan QCNWKA006WJZZ Extension Cable, 3 to 2pins Adjustment to Lamp QCNW-E007WJZZ Extension Cable, 14pins Main to Power...
  • Page 127 XG-MB67X...
  • Page 128 XG-MB67X 2006 COPYRIGHT © 2005 BY SHARP CORPORATION ALL RIGHTS RESERVED. No Part of this publication may be reproduced, stored in a retrieval system, or transmitted in any from or by any means, electronic, mechanical, photocopying , recording, or otherwise, without prior written permission of the publisher.

Table of Contents