Figure 18. Alarm/Trap Information Page - D-Link DSL-300G User Manual

Hide thumbs Also See for DSL-300G:

Table of Contents

DSL-300G ADSL Modem User's Guide

Alarms

The Configuration Manager can be used to view alarms that occur in the system. Alarms, also called traps, are

caused by a variety of system events, including connection attempts, resets, and configuration changes.

Although you will not typically need to view this information, it may be helpful in working with your ISP to

troubleshoot problems you encounter with the device. (Despite their name, not all alarms indicate problems in

the functioning of the system.)

To display the Alarm page, log into the Configuration Manager, click the Alarm button in the Admin folder.

Figure 18. Alarm/Trap Information Page

Listed under Alarm/Trap Information are the time and date of each recorded alarm event, the type of alarm, and

a brief statement indicating its cause.

To remove all entries from the list, click

. New entries will begin accumulating and will display when

you click

If you want to display an automatically updating Alarm table, you can click

to display

a separate Alarm Monitor window.

Table of Contents