Table of Contents
Advertisement
Operating Your Camera
AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but
the higher the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 5.3dB to 32dB.
- HIGH : Allows automatic gain control from 5.3dB to 37dB.
SENS-UP : When it is night or dark, the camera automatically detects the light level
and maintains a clear picture if this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
RETURN : Select this to save the changes in the EXPOSURE menu and return to the
SETUP menu.
Notes
• I f you press the Function Setup switch in 'AUTO' mode, You can adjust brightness by
increasing or decreasing the shutter speed. (x2 ~ x512)
• N ote that the higher the zoom level, the brighter the screen, but the more likely it is that an
after-image will appear.
• A lthough Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the
zoom level is increased, this is normal.
White Balance (White Bal)
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select 'White Bal' by using the Function
Setup switch so that the arrow indicates 'White Bal.' .
2. Select a desired mode using the Function Setup switch.
MAIN MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSDR
22
COLOR CCD CAMERA
DC
ATW
OFF
User's Manual
※ Select one of the following 5 modes, as appropriate for your purpose.
ATW
: Select this when the color temperature is between 1,700˚K and
11,000˚K.
OUTDOOR : Select this when the color temperature is between 1,700˚K and
11,000˚K. (sodium light inclusion)
INDOOR
: Select this when the color temperature is between 4,500˚K and 8,500˚K.
MANUAL
: Select this to fine-tune White Balance manually. Set White Balance first by
using the ATW or AWC mode. After that switch to MANUAL mode, fine-
tune the White Balance and the Function Setup switch.
AWC →SET : To find the optimal luminance level for the current environment, point the
camera towards a sheet of white paper and press the Function Setup switch. If
the environment changes, readjust it.
Notes
• W hite Balance may not work properly under the following conditions. In this case select
the AWC mode.
W hen the color temperature of the environment surrounding the subject is out of the
❶...... ... ...
control range (e.g. clear sky or sunset).
2
...When the ambient illumination of the subject is dim.
3 ......
I f the camera is directed towards a fluorescent light or is installed in a place where
illumination changes dramatically, the White Balance operation may become unstable.
COLOR CCD CAMERA
23
User's Manual
Advertisement
Table of Contents
