Setup menu list (continued)
OPERATION screen
Display
Item
mode
DELETE
(PB)
INDEX
(PB)
CLIP PROTECT (PB)
OTHER FUNCTIONS screen
Display
Item
mode
IR REMOTE
(Camera)
(PB)
REC LAMP
(Camera)
BEEP SOUND
(Camera)
CLOCK SET
(Camera)
(PB)
98
Description of settings
Deletes clips.
ALL CLIPS: Deletes all clips.
SELECT:
Deletes only the selected clips. Press the EXEC button to delete
clips.
NO:
Returns to the last screen.
•
Clips for which CLIP PROTECT is specified are not deleted.
Adds indexes to clips or deletes them.
YES:
Adds or deletes indexes.
NO:
Returns to the last screen.
Protects clips to prevent accidental deletion.
YES:
Enables clip protection or cancels protection.
NO:
Returns to the last screen.
•
Executing a format of the memory card (page 32) will delete all clips even if
they are protected.
Description of settings
Sets the operations of the supplied remote control unit.
ON:
Accepts commands from the remote control.
• Note that if the same type of remote control is used near the unit, the
unit may receive commands from the other remote control, during
shooting for example, and suddenly operate in an unexpected manner.
OFF:
Operations are not accepted from remote control.
Sets lighting of the tally lamp.
FRONT: Front tally lamp (microphone side) lights.
REAR: Rear tally lamp (viewfinder side) lights.
BOTH: Both tally lamps light.
OFF:
The tally lamp does not light.
Turns the beep sound ON or OFF.
ON OFF
When ON is selected the beep is sounded, if the memory of the SD Memory
Card has been used up during recording.
When the beep is sounded, the audio signals from the output connector are
muted before the beep sound is output.
Sets the camera-recorder's calendar.
indicates the factory setting.