Changing The Configuration; Other Sources Of Information; Rendezvous Printing - Brother NC-9100h Network User's Manual

Changing the Configuration

From a Macintosh, the easiest way to change the printer or print
server parameters is to use a web browser.
Simply connect to the printer using the format: http://ip_address
where ip_address is the address of the printer.

Other Sources of Information

1
Visit http://solutions.brother.com/ for more information on
network printing.
2
Refer to chapter 11 of this user guide to learn how to configure
the IP address of the printer.
3
Refer to chapter 9 for more information on web-based
management.

Rendezvous Printing

Rendezvous lets you create an instant network of computers and
smart devices just by connecting them to each other.
Rendezvous support allows a Rendezvous ready printer to
automatically configure itself to work in a OS X Rendezvous system.
You do not need to manually configure any IP address or network
settings within the printer as the printer will automatically configure
itself.
Refer to the information below if you wish to learn how to configure
a Brother DCP/MFC into a Mac OS X Rendezvous environment.
Please note Brother recommends that you use version OS X 10.2.2
or later.
Visit http://solutions.brother.com/ for the latest information on how to
set of Rendezvous Printing for Mac OS 10.2.
7 - 11 APPLETALK (ETHERTALK) TCP/IP PRINTING