Freezing A Moving Picture; Cancelling Video And Audio Temporarily; Lamp Mode; Selection Of The Color Mode (Dcm - Mitsubishi Electric XD80 User Manual

General Operation

Freezing a Moving Picture

This function is used to stop and view a moving picture. Note that the input
image continues to advance even though the picture there is a still picture
condition.
A press of the FREEZE button changes the screen to a still picture. A
further press returns the screen to a moving picture.

Cancelling Video and Audio Temporarily

This function is used to cancel the video and audio at the same time.
A press of the MUTE button will blank the picture and the sound, and
the screen will take on the background color that has been set.
Another press will cause a return to the original conditions.

Lamp Mode

Use this if the picture is projected on a small screen and the picture
is too bright or when projecting images in dark rooms.
Pressing the LAMP MODE button will set the lamp mode.
Low (STATUS indicator is lit green)
The lamp's brightness is reduced to approximately 80%, extending the
lamp's service life.
Normal (STATUS indicator is off)
The lamp brightness is set to 100% and the screen is bright.
Note:
Frequent switching this mode can degrade the lamp.

Selection of the Color Mode (DCM)

Select the preset color mode.
Pressing the DUAL COLOR MODE button of the projector switches the
color mode.
Each time the DUAL COLOR MODE button is pressed, the screen will be
black for approximately 3 seconds and then a message indicating the
switched color mode will be displayed for approximately 1.5 seconds.
Dynamic ..... Select this to prioritize brightness.
Vivid ........... Select this to prioritize color.
E-26
FREEZE MUTE LAMP MODE AUTO
1 2 3 4
ASPECT
VOL KSTN ZOOM
TIMER
FREEZE LAMP MODE AUTO
MUTE
1 2 3 4
ASPECT
VOL KSTN ZOOM
TIMER
STATUS indicator
STATUS STANDBY
DUAL COLOR
MENU
MODE
FREEZE LAMP MODE AUTO
MUTE
1 2 3 4
ASPECT
VOL KSTN ZOOM
TIMER
STATUS STANDBY
DUAL COLOR
MENU
MODE
DUAL COLOR MODE button