In this time, Transmit a compressed application image of new version with binary file trans-
mition mode in terminal emulation and after downloading image file, write correctly and
then, wait for rebooting application program.
[Figure 1-5] as below is message on terminal that IRD transmit new file, write in FLASH and
then reboot.
xxxxxxx bytes received.
Serial binary download completed.
CRC check about downloaded image ... O.K
Expand the compressed image at 0x010d0000
Erasing FLASH sector #16 - #60 (wait a minute) ...
#60
FLASH memory was erased successfully.
Programing FLASH memory (wait a minute) ... done
Verifying FLASH memory with source data ... done
FLASH memory was programmed successfully.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!! from now, automatic REBOOTing the System !!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[Figure 1-5] On the terminal
3-4