Voice Mail Administration - NEC 2400 Integration Manual

3. If your switch has password capability, assign a password to the new
extension.
4. Assign to the new extension, the service: ldg_ni_vm
a. Log on to the INTUITY system as sa or craft.
b. From the INTUITY Administration menu select the following
c. From the Voice Equipment screen, press
d. Select Services to Called Numbers from the Assign menu.
e. Press
f. Enter the called number that was administered on the switch for this
g. Press
h. Press
5. If the phantom extension is to be accessed from outside your system,
assign the extension to a Direct-Inward-Dialing number.
6. Provide the Lodging message retrieval number to your subscribers for the
Lodging application.

Voice Mail Administration

Voice mail is enabled when the switch sends a guest's call to a coverage path.
The following procedure, however, provides a separate number that can be used
at any time to send voice mail to a guest.
To provide this service:
1. Administer on your switch a phantom number. This number is used to
send voice messages to your subscribers.
2. Configure the phantom number so that the INTUITY system hunt group
covers all calls.
sequence:
>Voice System Administration
Voice Equipment
(F3).
ASSIGN
(F2) and select ldg_ni_vm.
CHOICES
purpose.
(F3). A command-output screen appears confirming
SAVE
your choice.
(F6) three times to exit to the Voice Equipment
CANCEL
screen.
Voice Mail Administration
(F8) then
CHG-KEYS
Issue 2 December 1995
C-3