Tv Setup; Guidelines For Setting Up And Using Your New Widescreen Tv - Mitsubishi WD-57833 Owner's Manual

2
TV Set-Up

Guidelines for Setting Up and Using Your New Widescreen TV

Getting Started
1. Review the important safety, installation, and oper-
ating information at the beginning of this book.
2. Choose a location for your TV.
• Allow at least four inches of space on all sides
of the TV to help prevent overheating. Over-
heating may cause premature failure of the TV
as well as shortened lamp life.
• Avoid locations where light may reflect off the
screen.
• See the stand requirements under "Important
Information About Your TV."
3. Install the batteries in the remote control. See the
following page. See chapter 4, "TV Operation and
Features" for more on use of the remote control.
4. Plug your TV into a power outlet. The green LED on
the front of the TV will start blinking rapidly. After
the green LED stops blinking, press the POWER key to
power on the TV.
5. When the Welcome screen appears the first time
you power on the TV, select a language for TV
menus. You can later change the language through
the Setup menu.
6. Connect your audio/video (A/V) devices to the TV
and perform initial setup.
• See chapter 3, "TV Connections" for connec-
tion diagrams.
• See the following pages for initial TV setup and
use of the Auto Input Sensing feature.
• See chapter 6, "NetCommand," to perform
NetCommand IR "learning" for control of your
home theater.
7. Mitsubishi recommends you perform a channel
scan for channels received on ANT 1 and ANT 2.
See "Initial TV Setup" on the following pages.
8. You can now start watching TV or you can perform
additional setup and customization through the TV
menus.
TV Operation
1. Review chapter 4, "TV Operation and Features," for
TV features including:
• Input Selection (viewing source). Select a
connected program source to watch, such as a
VCR, DVD player, or antenna. Press INPUT on the
remote control to select from icons for the TV
inputs. See "Choosing a Viewing Source."
• ChannelView™/TV Guide On Screen
GUIDE to see channel listings for programs on
ANT 1 and ANT 2. To override ChannelView
and use the TV Guide On Screen system, see
Chapter 5, "TV Menu Settings" and the Inputs
menu Guide options.
• Picture Formats. Press FORMAT to cycle through
picture sizes and shapes to find the one best
suited to the current program. See "TV Signals
and Display Formats."
2. To understand use of the Input Selection menu
with NetCommand-controlled devices, see "Using
NetCommand."
3. To view JPEG photo files on the TV, see "Viewing
Camera Files."
Additional TV Setup
1. Review chapter 5, "TV Menu Settings," to custom-
ize TV operation. Press the MENU key to enter the
menu system. Some examples of settings you may
wish to change include:
• Fav. Use an on-screen menu to create custom
lists of your favorite channels from ANT 1 and
ANT 2. See Setup > Edit.
• Order. Rearrange the device icons in the Input
Selection menu to put frequently used icons
near the front. See Inputs > Order.
• Name. Change the device names that appear
in the Input Selection menu. See the Inputs
menu Name options.
• TV Guide On Screen. Set up and enable the
TV Guide On Screen system. See the Inputs >
Guide menu.
11
®
. Press