Perform Initial Setup - Philips AE8000 User Manual

Perform initial setup

When the radio is powered on for the first
time, the [Setup wizard] appears on the
display panel. Follow the instructions below to
configure some basic settings.
To listen to Internet radio, you need to set up
Wi-Fi connection first. Wi-Fi Protected Setup
(WPS) is a standard created by Wi-Fi Alliance
for easy establishment of secure wireless home
network. If your wireless router supports WPS,
you can quickly and securely connect the radio
to the router through one of the two setup
methods: Push Button Configuration (PBC), or
Personal Identification Number (PIN). For those
that do not support WPS, you have another
option to connect the radio to the wireless
router.
Note
•
Before you connect to a network, familiarize yourself
with the network router.
•
Make sure that your home Wi-Fi network is enabled.
•
For better Wi-Fi reception, rotate and adjust the
position of the Wi-Fi antenna.
1
When [Setup wizard] is displayed, press
to select [YES] to start the setup. If
/
you select [NO], you are asked to run the
wizard next time.
Setup wizard
Start now?
YES NO
2
Press OK to confirm.
» A language list is displayed.
3
Press / to select a language for the
system.
4
Press OK to confirm.
» [12/24 hour format] is displayed.
5
Press / to select 12 or 24 hour format.
6
Press OK to confirm.
EN
8
7
Repeat steps 3 to 4 to select whether to
synchronize time with radio stations.
Auto update
Update from DAB
Update from FM
Update from Network
No update
[Update from DAB]: synchronize time
•
with DAB stations.
• [Update from FM]: synchronize time
with FM stations.
[Update from Network]: synchronize
•
time with Internet radio stations.
» If [Update from Network] is selected,
repeat steps 3 to 4 to set time zone,
and then repeat steps 5 to 6 to set
daylight saving time.
• [No update]: deactivate time
synchronization.
» If [No update] is selected, repeat steps
3 to 4 to set date and time.
8
Repeat steps 5 to 6 to select [YES]to keep
network connected.
9
Repeat steps 3 to 4 to select the Wlan
region.
» The radio begins to search for wireless
networks automatically.
» A list of available Wi-Fi networks
appears.
10
Repeat steps 3 to 4 to select your Wi-Fi
network.
11
Press / to select an option to connect
your wireless router.
WPS Menu
Push Button
Pin
Skip WPS
[Push Button]: select this option if your
•
wireless router supports WPS and
PBC setup method. You are prompted
to press the connect button on your
router and then press OK to continue.