Advanced Feature; Static Route; Rip(Routing Information Protocol) - D-Link DVG-5004 Operation Manual

62

7. Advanced Feature

Static Route※

To build static routes within an internal network. These routes will not apply to the Internet.
Route: Enter the IP of the specified network.
Route Mask: Enter the subnet mask to be used for the specified network.
Next Hop IP: Enter the IP address to the specified network.
Inter Face: Select the inter face.
RIP(Routing Information Protocol) ※
To establish dynamic routes within an internal network. These routes will not apply to the Internet.
Enable Authentication/Authentication Password: If the box is checked. All the boxes in this RIP
group should be filled in the same password.
SIP Operation Manual V2.6