Notification Light - Sony Xperia D5322 T2 Ultra dual User Manual

Quick settings for interruptions
There are three modes available for interruptions on your device: Silent, Priority and
Sound. Within each mode, you can determine how and when notifications can
interrupt you, if at all. For example, you can set your device to only show you priority
notifications during the hours you're at work or block all notifications while you're
taking a nap. You can get quick access to the basic interruption and sound settings
by pressing the volume key up or down.
Silent – All interruptions get blocked, excluding alarms. There is still sound when alarms go off
1
Priority – Only allow priority interruptions
2
Sound – Allow all interruptions
3
To set priority interruptions
1
From your Home screen, tap
2 Find and tap Settings > Sound & notification > Interruptions.
For more information about settings for notifications and interruptions, see
notifications on page 37.

Notification light

The notification light informs you about battery status and some other events. For
example, a flashing white light means there is a new message or a missed call. The
notification light is enabled by default but can be disabled manually.
When the notification light is disabled, it only lights up when there is a battery status warning,
for example, when the battery level goes below 15 percent.
To enable the notification light
1
From your Home screen, tap
2
Find and tap Settings > Sound & notification .
3 Drag the slider beside Notification light to the right.
Icons in the status bar
Status icons
Signal strength
No signal
Roaming
Sending and downloading GPRS data
Sending and downloading EDGE data
This is an Internet version of this publication. © Print only for private use.
.
.
22
Managing