Yamaha Aventage RX-A1050 Owner's Manual page 111

Menu Item
Delay Enable
Lipsync Auto/Manual Select
Adjustment
Dynamic Range
Max Volume
Sound Initial Volume
Pure Direct Mode
Adaptive DSP Level
CINEMA DSP 3D Mode
Virtual Surround Back Speaker
Object Decode Mode
Video Video Mode
HDMI Control
HDMI Audio Output
Standby Through
Network Connection
IP Address
Network Network Standby
MAC Address Filter
Network Name
Bluetooth
Bluetooth Audio Receive Disconnect
Bluetooth Standby
Function
Enables/disables the Lipsync adjustment for each input source.
Selects the method to adjust the delay between video and audio output.
Adjusts the delay between video and audio output manually.
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Sets the maximum volume to prevent excessive loudness.
Sets the initial volume for when this receiver is turned on.
Selects whether to output video signals during the Pure Direct mode.
Selects whether to automatically adjust the CINEMA DSP effect level.
Enables/disables CINEMA DSP 3D.
Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers.
Enables/disables playback of object-based audio signals such as Dolby Atmos contents.
Enables/disables the video signal processing (resolution and aspect ratio).
Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input).
Selects a device to output audio.
Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
Selects the network connection method.
Configures the network parameters (such as IP address).
Selects whether to enable/disable the function that turns on the unit from other network devices.
Sets the MAC address filter to limit access to the unit from other network devices.
Edits the network name (the unit's name on the network) displayed on other network devices.
Enables/disables the Bluetooth functions.
Terminates the Bluetooth connection between the
Selects whether to enable/disable the function that turns on the unit from
111
En
Bluetooth device (such as smartphones) and the unit.
Bluetooth devices (
Page
117
117
117
117
117
118
118
118
118
118
118
119
120
120
121
121
121
122
122
123
123
69
Bluetooth standby). 123