Canon Booklet Trimmer-A1 Service Manual page 81

7) Shift the feeding guide plate [1] to the
other side, and fit a hex wrench [2] or
the like in the opening shown to keep
the feeding guide plate in place.
8) Detach the 4 hex hole screws [1]; then,
while picking the 2 knobs [2], detach
the cutter upper blade [3].
9) Remove the 4 hex hole screws [1], and
detach the cuter lower blade [2].
1. The upper and lower blades
of the cutter are extremely
sharp. Be sure to take extra
care during the work.
2. You will need a special tool
to adjust the position of the
cutter. Do not remove any el-
ement that is not indicated
here.
COPYRIGHT© 2002 CANON INC. 2000 CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002
CHAPTER 3 MECHANICAL SYSTEMS
F03-205-05
F03-205-06
F03-205-07
3-13